Top positive review
5.0 out of 5 stars2000 Dodge Ram brake light and ABS light on.
Reviewed in the United States on May 7, 2017
FIRST OF ALL I AM ONE WHO NEVER WRITES REVIEWS THE REASON I WRITE THIS IS THE SIMPLICITY AND EASE OF REPLACEMENT NOT TO MENTION THE MONEY YOU SAVE!!!!!! 2000 Dodge Ram brake light and ABS light on. Speedometer wont read unless speed is over 20 miles. Easy fix (20 min) took me longer to drop the spare tire. Once Tire is out -there is lots of room to get to the ABS sensor on the deferential. Sprayed a little WD-40 to clean the surrounding area. You need 3 tools (flat crew driver, 9/16, 1/2 wrench or socket) to remove the ABS sensor .A flat end screw driver to unhook the electrical connector (don't lift the tab to hard or you will break the locking tab and have to use electrical tape to hold together). 9/16 to remove first nut that holds accessories lines. After first nut is removed use 1/2 to remove ABS sensor screw/nut. Use the flat end screw driver and try to slide it under the ABS sensor at the same time twist and lift with the other hand should pop out w/ no problems. Once removed insert new ABS senor.(Use a little grease along the edge of sensor- I used spark plug grease to help it slide down(that's all I had)), There will be a little space(very small) between the sensor and differential. When you start to torque down the space will close(start off slow) -grease will extrude and the sensor will be flush. Follow the steps backwards to complete the job. Very easy Hope this helps and saves you a lot of money.
