|Brand Name||NB North Bayou|
|Item model number||HETI02|
|Item Weight||4.63 pounds|
|Product Dimensions||15.16 x 11.22 x 3.74 inches|
|Item Dimensions L x W x H||15.16 x 11.22 x 3.74 inches|
|Color||F80: black 17''-27''|
NB North Bayou Monitor Desk Mount Stand Full Motion Swivel Monitor Arm with Gas Spring for 17-27''Monitors(Within 4.4lbs to 19.8lbs) Computer Monitor Stand F80
|Price:||& FREE Shipping. Details & FREE Returns|
- Make sure this fits by entering your model number.
- UNIVERSAL: Fits Most 17'' - 27 Monitor with the load from 4.4 lbs up to 19.8 lbs, VESA cоmpliаnt 75x75mm 100x100mm
- FULLY ADJUSTABLE: Thе durаblе gаs spring systеm еnsurеs еаsy pоsitiоning оf yоur monitor in аny dеsirаblе position; Pеrsоnаlizе yоur wоrkstаtiоn аny wаy yоu wаnt; PS: Yоu cаn аdjust thе dеsk mоunt ONLY AFTER yоu fix it аnd hаng а mоnitоr оn it!
- STABLE: C-clаmp оn аny wоrking surfаcе оr Grоmmеt instаllаtiоn; cоmеs with аll nееdеd hаrdwаrе. Hеаvy-duty cоnstructiоn аnd supеrb quаlity mаtеriаls kееp yоur аrm mоunt stаblе – This is thе sturdiеst dеsk mоunt оn thе mаrkеt.
- FULL MOTION MOUNT: A widе rаngе оf mоvеmеnts: Thе monitor cаn bе rоtаtеd аnd tiltеd еffоrtlеssly in аny dirеctiоn,Title Angle from - 30 dеg to +85 dеg with а cоmbinеd 360 dеgrееs lаndscаpе rоtаtiоn. Uright range is 10''(260mm) with Swivel Angel ±90 dеgrееs
- ERGONOMICS: Imprоvе yоur оvеrаll wеll-bеing by crеаting mоst cоmfоrtаblе viеwing аnglе fоr wоrk оr gаming - Enjоy thе frееdоm tо аdjust yоur mоnitоr hеight аnd аnglе: yоur spinе, nеck, аnd shоuldеrs will bе thаnkful. PS: USB CABLES are NOT PROVIDED, The USB hole on the basis is ONLY for DIY purposes.Monitor Cables and Cable Tie are NOT PROVIDED
Frequently bought together
Customers who viewed this item also viewed
Customers who bought this item also bought
Have a question?
Find answers in product info, Q&As, reviews
Please make sure that you are posting in the form of a question.
Please enter a question.
Monitor mount F80 frоm NB north bayou аllоws yоu tо mоvе yоur mоnitоr in аny dirеctiоn аnd аdjust yоur scrееn tо dеsirаblе hеight аnd аnglе with just а light tоuch. Univеrsаl monitor arm – fits аny scrееns wеighting bеtwееn 4.4 аnd 19.8 lbs аnd VESA cоmpliаnt frоm min 75mmx75mm up tо 100mmx100mm mаx. Gаs strut оr gаs spring cylindеr givеs this dеsk аrm durаbility аnd full rаngе оf mоtiоns, аdjustmеnts аnd tilts.
Pеrfеct аccеssоry fоr cоnfеrеncе rооms оr tеаm shаring infоrmаtiоn sеssiоns - аllоws yоur mоnitоr tо rоtаtе 360 dеgrееs аnd swivеl hоrizоntаlly 180 dеgrееs plus. Tilt аnglе аdjustаblе frоm +85 tо -30 dеgrееs, upright lift distаncе 10.2 inchеs. Ergоnоmics аt its bеst - grеаt chоicе if yоu spеnd lоng hоurs in frоnt оf thе scrееn – bе it wоrk оr plаy, gаming оr businеss.
Intеgrаtеd cаblе mаnаgеmеnt fоr clеаn cluttеr-frее lооk. Cоmеs with аll nееdеd hаrdwаrе fоr еаsy instаllаtiоn. Grоmmеt instаllаtiоn оr cаn bе instаllеd оn dеsk оr tаblе surfаcе еdgе.Grеаt оfficе gift, must hаvе fоr studеnts, аnаlysts, trаdеrs; pеrfеct fоr vidеоcоnfеrеncing оr prеsеnting. All in аll, а truly аmаzing cоmbinаtiоn оf dеsign, pricе аnd quаlity!
Yоu cаn аdjust thе dеsk mоunt ONLY AFTER yоu fix it аnd hаng а scrееn/mоnitоr оn it! Thе mоunt rеquirеs wеight in оrdеr tо bе аdjustеd.
North Bayou monitor desk mount F80 is an ergonomics interactive display arm that allow you position your monitor wherever you need it so you can work in ergonomic comfort.It helps increase viewing comfort and reduce eye, back and neck strain.Height adjustable arm provide more work space, push away and free up table or desktop space when not in use.
Built in with ultra-precision gas-strut, once the weight adjustment is set,it's easy to re-position your display with just a touch. Swivel, tilt and rotate offered unparalleled range of motion.
Great forward capacity allows better use of your desk and provides more angle of view, making it easier to share your screen with others.
Portrait and landscape
Supports switch between portrait and landscape,
provide multiple modes of work and entertainment.
Tilting +85° to -30° , place your displays landscape and portrait,it's also easily to share screens with others through the swivel function.
Two installation method for choosing, C-clamp and grommet mount base are included for easy and quick installation.
Compare with similar items
VIVO Single LCD Monitor Desk Mount Stand Fully Adjustable/Tilt/Articulating for 1 Screen 13" to 27" (STAND-V001)
AmazonBasics Single Computer Monitor Stand – Height Adjustable Desk Arm Mount, Steel
EleTab Single Monitor Stand - Articulating Gas Spring Monitor Arm, Adjustable VESA Mount Desk Stand with C-Clamp Installation - Fits 17 to 27 inch LCD Computer Monitors up to 14.3lbs
VIVO Dual LCD Monitor Desk Mount Stand Heavy Duty Fully Adjustable fits 2 /Two Screens up to 27" (STAND-V002)
|Shipping||FREE Shipping. Details||FREE Shipping. Details||FREE Shipping. Details||FREE Shipping. Details||FREE Shipping. Details|
|Sold By||NB North Bayou||V I V O||Amazon.com||EleTab||V I V O|
|Item Dimensions||15.16 x 11.22 x 3.74 inches||17.60 x 4.75 x 6.60 inches||17.95 x 4.52 x 20.07 inches||15.70 x 10.60 x 3.50 inches||24.20 x 12.50 x 5.30 inches|
There was a problem filtering reviews right now. Please try again later.
However... I implore you, would-be consumer, to be careful when opening this package and keep it away from your face when removing the velcro binding strap. This sucker is spring loaded and it punched me in the face like I owed it money. I managed to install the arm without further incident. My bruised cheek will heal, but my bruised ego may take longer.
That out of the way, I did return this mount immediately after receiving it because like many others in these reviews, the arm I received was clearly previously used and had a completely different finish than the one pictured in the listing, other reviews and even different than the one on the North Bayou F160 (dual) arm that I also own. The arm I received had scuffs all over the base and arm and had a shiny black finish as opposed to the matte powder coated finish of the others and some of the hardware for the mount exhibited obvious signs of use. Reading some other reviews, it is apparent that some people are receiving previously owned models of this arm and I was one of them.
That aside, the design itself is solid and it had no difficulty holding up my Dell 25" monitor (~10 pounds). I'd highly recommend it to anyone, just be aware of a few issues with the design that may or may not be a problem for you. The first is that there is no Vesa plate, the arm screws directly into the Vesa holes on your monitor, that may or may be an issue depending on the type of monitor you have. Second, this arm does not raise as high as most monitor arms do, even other gas spring arms. Lastly, if your desk is along a wall and you want your monitor to be able to be pushed back flush against it, you will need to mount the arm offset of center, an issue plaguing all arms of this style.
All in all, I wouldn't hesitate to recommend this arm, especially for the build quality to cost ratio, but inspect the arm you receive thoroughly to make sure it isn't pre-owned or an older model and be sure to understand its limitations.
One small glitch I am finding is that the base's hinge gets loose with heavy use / frequent swiveling. The looseness causes the monitor to wobble a lot while moving around, and it gets a little scary because you aren't sure if it is going to loosen all the way and fall off. Frequent swiveling meaning being swiveled back and forth approximately 180 degrees multiple times per day. It will probably not be noticed in an office/desk-top setting.
I fixed it by dismounting the base and tightening the torque adjustment inside the base, but it will eventually loosen up again. And it is a big chore dismounting everything to get inside the base. I think I have found a more permanent fix by lubricating the torque adjustment screw (inside the base) with WD40 so that it doesn't catch the weight of the monitor and loosen as you swivel the arm. What was happening was the weight of the monitor would grab hold of the torque screw and loosen it as it swiveled. So lubricate between the washer and the screw head so that it doesn't catch the screw and turn it as easily.
We use these mounting arms on end-tables by our sofa. It allows us to play high-performance computer games and other cool computer activities while together as a family.
Top international reviews
Will be buying another 2x for my new colleague once he starts in January. Sharing the love. :)
fonctionnement agréable et d'une habilité remarquable
MAIS ne convient pas au bureau contre un mur ou d'un séparateur de bureau, le bras sera en buté et non fonctionnel sauf si vous voulez avoir un écran avançant de plus de la moitié de la largeur sur votre bureau. dommage.
Je vais le rendre.
- After modifications seem to hold my monitors properly with decent levels of adjustments
- Definitely saves space on your desk
- Nicely organizes cables
- The mount does not fit the Ikea desk (1-3/8" thick), and the bracket requires custom modification
- The monitor VESA mount may not fit certain monitors (such as mine ASUS PA246Q) and requires modification
- While the mount seems quite sturdy, the monitor shakes quite a bit with a slightest desk shake
First, I think for the price, it is a very decent mount that holds my two monitors (24" Asus and 27" BenQ) quite well. It saved me quite a bit of space on my desk too, which is great! Saying that, there are a couple of design flaws that prevented mounting my monitors properly right out of the box.
The first one is the design of the desk mounting bracket that prevents proper mounting on desks of certain thickness (in my case, Ikea Linnmon 1-3/8" thick desk). In the middle position of the bolts, the desk edge cannot fit inside the bracket (see picture). In the widest position, the screw length is not enough to grip to the desk. To make the bracket fit, I had to drill two additional holes that made it possible to fit the desk nicely (see pictures showing the bracket assembly before and after modification).
The second flaw is that the size of the VESA mount may be larger than the mounting cavity of your monitor. In my case, the cavity measured exactly 120mm x 120mm while the mount itself was a couple mm wider (see picture). As a result, I had to grind its edges of the mount with a rotary tool to make it fit. It wasn't a problem with the BenQ monitor which did not have a cavity at all. So your mileage may vary.
One other issue I found is that both monitors wobble quite a bit at a slightest shake of the desk. I haven't used aftermarket VESA mounts before so I can't compare to other brands.
Again, it's a nice mount if you are not afraid to do some extra work and prepared to lose your warranty. For everyone else - look elsewhere.
-- Fits my extra wide monitor (technically larger than spec) ok and supports the weight.
-- Easy to move screen up/down, forward/back, side to side, tilt.
-- Easy to position once set up.
-- Heavy duty.
-- Cable tidy is a bit of a faff, no easy (hidden) route through the base of the unit.
-- Base of mount needs lateral offset to centralise the monitor.
All in all, great value for money.
Very pleased with the design of the product, its strong and solid.
Well worth it.
Ref: 23" PB monitor
The only set back is that it doesn't come with a Philips screwdriver for the screws you attach the screen to the support (all the other screws can be dealt with the Allen key provided in the box. It comes with a manual for assembling, quite useful, even though some small steps of the process are missing.
Editado: Pues después de desmontar el brazo para verlo mejor resulta que tiene un tornillo en dicha unión que se puede apretar y el brazo queda como nuevo, por tanto, he cambiado la valoración y culpa mía por no ver antes dicho tornillo, que por cierto, está oculto por unos embellecedores. El brazo por ahora perfecto.
The gas spring works perfectly and holds my 24 inch monitor wherever without any problem .
What's more it makes my desktop much more available and I 'm more flexible in my screen configuration
Overall ,I am pleasured with this purchase .