Top Rated in 3D Printing Filament

Compare the most helpful customer reviews of the best rated products in our 3D Printing Filament store. These products are shortlisted based on the overall star rating and the number of customer reviews received by each product in the store, and are refreshed regularly.

Top rated products in 3D Printing Filament

product price FREE Shipping
Get free shipping
Free 5-8 day shipping within the U.S. when you order $25.00 of eligible items sold or fulfilled by Amazon.
Or get 4-5 business-day shipping on this item for $5.99 . (Prices may vary for AK and HI.)
Learn more about free shipping
on orders over $25.00 shipped by Amazon or get Fast, Free Shipping with Amazon Prime
4.8 | 2,930 customer ratings
96% of the ratings are 4-stars or 5-stars
I like this filament a lot, good color and quality. I use at
        Read more
By MSK
I just finished running a spool of Hatchbox pla 1.75mm filament through my Monoprice mp select mini 3d printer and had no issues whatsoever. It arrived in a vacuum sealed plastic bag and on a standard sized spool. I will purchase more and give it a thumbs
        Read more
By DagDerNiT
I have used a few different filaments brands over the years. I print parts for manufacturing equipment. I need to print two sets of part for two machines. Each set has 20 parts. Each part has an aluminum rod in the center for strength. Some of the parts have screws on the side to hold in the rods. I only had enough of the normal brand of
        Read more
By Pi+rate
product price FREE Shipping
Get free shipping
Free 5-8 day shipping within the U.S. when you order $25.00 of eligible items sold or fulfilled by Amazon.
Or get 4-5 business-day shipping on this item for $5.99 . (Prices may vary for AK and HI.)
Learn more about free shipping
on orders over $25.00 shipped by Amazon or get Fast, Free Shipping with Amazon Prime
4.8 | 2,552 customer ratings
95% of the ratings are 4-stars or 5-stars
Like anyone else reading this comment, I purchased almost all hatchbox PLAs. Until orange, dark blue hatchbox pla was my favorite. I am not sure if a PLA can get better than this because my prints are flawless.Orange has absolutely no stringing and prints the smoothest surfaces so far. At 0.2mm layer height, it is so smooth, even 3000
        Read more
By Dude
If you order this filament as of now, you will be receiving a “True Orange” type, which is MUCH different than the regular “Orange” that you would hope to be buying. For one—your prints will take on a dull matte finish, as opposed to the awesome shiny finish we’ve come to expect from Hatchbox. Not only that, the PLA itself
        Read more
By SilverDeoxys563
something has changed in the formula. I have three filaments I'm swapping between right now, including this orange hatchbox PLA. I got about 4-5 OK prints out of it, and then progressively worse bed adhesion followed up by constant jamming. at this point, it will jam up the hot end within a couple of minutes of starting a print. It
        Read more
By raphe
4.7 | 2,992 customer ratings
93% of the ratings are 4-stars or 5-stars
Surprised with the negative reviews on this PLA. I use Hatchbox EXCLUSIVELY and have done so for 2 years. I print cosplay props and armored suits for a living and there is NO SUBSTITUTE for this stuff in this price range. Having tried many brands I settled on Hatch along time ago. That said, I can go through up to 4-6 spools of
        Read more
By Amazon Customer
I am new to 3D Printing so it was pretty much sheer dumb-luck that landed this filament into my cart and then lap. I assembled my Ender 3 Pro over the course of a couple evenings, and by the weekend I was ready to start making figures and terrain. I read up on the slicer, plugged in the figures for both the printer and the PLA, took a
        Read more
By Joseph K
Okay. So I'm actually a pretty big fan of Hatchbox. I've used their black, copper, orange, red, and a few other colored PLA filaments. I've also used ZIRO's marble filament and 3d Solutech's clear filament.But...their gray is by far the worst PLA I've ever used. Full stop. I've tried 3 rolls of this, and all 3 rolls have been straight
        Read more
By P and A Alter
4.7 | 1,791 customer ratings
92% of the ratings are 4-stars or 5-stars
If you have a mk3, copy the following into a text file name it 'sainsmart.ini' and then load it into slic3r. It will me the difference between ugly and messed up prints to beautiful outputbed_temperature = 70bridge_fan_speed = 100cooling = 1disable_fan_first_layers = 1extrusion_multiplier = 1.03fan_always_on = 1fan_below_layer_time =
        Read more
By cosmickatamari
Just received my first reel of this material and I must say that I'm quite pleased. I print a lot of flexible filament (Ninjaflex and Filaflex) and this material compares favorably.Unlike the Sainsmart ABS, this filament comes on a plastic reel with a "standard" size bore, so it will fit on most printers. I checked over the
        Read more
By Scott B.
Update 1: Sainsmart contacted me and offered to replace the bad rolls and give the filament another shot. I gave them my address, etc., but a month later and no filament ever showed up, so I'm keeping this review at 1 star. If the new filament ever shows up and it works out, I'll update this review.Update 2: Sainsmart shipped the
        Read more
By Kindle Customer
product price FREE Shipping
Get free shipping
Free 5-8 day shipping within the U.S. when you order $25.00 of eligible items sold or fulfilled by Amazon.
Or get 4-5 business-day shipping on this item for $5.99 . (Prices may vary for AK and HI.)
Learn more about free shipping
on orders over $25.00 shipped by Amazon or get Fast, Free Shipping with Amazon Prime
4.6 | 6,627 customer ratings
91% of the ratings are 4-stars or 5-stars
Sure it may not be called "Amazon Basics" but this filament is identical - same spool, even the Overture logo and other writing on the spool match the Amazon Basics filament line. I love this stuff, it's cheap and it works well in my Prusa MK3S and my Monoprice Maker Select
        Read more
By Grahame W.
I'm a 23 year Engineering Team Leader and side hustling Maker. You can find us on element14.com and Raising Awesome on YouTube. I was not paid or provided freebies for this review.The PLA filament worked just as any I have used before. The specs were a little wider on the diameter, but I chalk this up to them actually being honest on
        Read more
By S. Miller
I'm extremely impressed with the way this filament has been going through my Ender 3 Pro. Great adhesion and goes through my extruder like butter. Extruder temp 195 Bed temp
        Read more
By Nick
product price FREE Shipping
Get free shipping
Free 5-8 day shipping within the U.S. when you order $25.00 of eligible items sold or fulfilled by Amazon.
Or get 4-5 business-day shipping on this item for $5.99 . (Prices may vary for AK and HI.)
Learn more about free shipping
on orders over $25.00 shipped by Amazon or get Fast, Free Shipping with Amazon Prime
4.6 | 6,391 customer ratings
90% of the ratings are 4-stars or 5-stars
This was a great set of sample colors to go with my new 3D Pen. THere's enough variety to make some interesting objects without running out. But, once you have a palette of colors you like to use, it probably makes more sense to buy larger spools of those colors. I'm almost out of the silver and the blue. I love that there were
        Read more
By Linzart
Nice selection of colors in good sample lengths. Some of the colors I haven't seen in any other assortments (and I buy A LOT of assortments): the "metal bronze" is more of a metallic goldish green, almost metallic chartreuse, and the six transparent colors are very light, perfect for subtle jewels, vehicle lights, etc. None of
        Read more
By Aldo Ross
I had to knock off a star because the quantity this comes in just makes no sense to me now.If you are getting a new printer and getting this to have a variety of colors, just don't, rather just get a full 1kg spool of a single color to start with. If you have a specific idea on what you want to do with tiny amounts of lots of colors then
        Read more
By Cobus van Eeden
product price FREE Shipping
Get free shipping
Free 5-8 day shipping within the U.S. when you order $25.00 of eligible items sold or fulfilled by Amazon.
Or get 4-5 business-day shipping on this item for $5.99 . (Prices may vary for AK and HI.)
Learn more about free shipping
on orders over $25.00 shipped by Amazon or get Fast, Free Shipping with Amazon Prime
4.7 | 1,601 customer ratings
92% of the ratings are 4-stars or 5-stars
i printed this attemp 230feed-rate 120%print speed 25 (or 35)hot bed 80if infill i like 100% but 25% is okay to build withif bridging use supports with 25 percent linesgrid support use 25% but only touch build plate otherwise you screws taking out of holes using everywherehope this kinda
        Read more
By Alyssa
I've tried many different types of flexible filaments over the years, many with very inconsistent results (jamming and feed issues), despite many hours of fine tuning my print profile settings. When I did have success I had to sacrifice nice clean prints and print with a 0.6mm nozzle. But with Sainsmart TPU filament I am able to print
        Read more
By CHWcosplay
I was surprised when I opened this and found the filament to behave like a wet noodle!Despite this, it has mostly worked in my unmodified Ender 3, although I've had a few jams that I blame on software slicing errors and bad bed leveling. Improving the contraining of the Ender3 extrusion path might make this better.Printed parts with
        Read more
By Amazon Customer
product price FREE Shipping
Get free shipping
Free 5-8 day shipping within the U.S. when you order $25.00 of eligible items sold or fulfilled by Amazon.
Or get 4-5 business-day shipping on this item for $5.99 . (Prices may vary for AK and HI.)
Learn more about free shipping
on orders over $25.00 shipped by Amazon or get Fast, Free Shipping with Amazon Prime
4.6 | 1,714 customer ratings
91% of the ratings are 4-stars or 5-stars
I've experienced all of the problems negative reviewers have mentioned (except bad spooling)... Until I learned why. Now it prints as easy as PLA, and strong enough that I bent a sturdy pair of hardened steel pliers while trying to remove supports after I screwed up my settings. My parts are in use on industrial clients' production
        Read more
By James D.
Good filament, prints exactly as you would expect. However despite some reports I had read, it isn't nearly as intense as Prusa's Orange, if that is what you are
        Read more
By Moon Dog
I'm really disappointed with this filament. I ordered both black and orange rolls of PETG. The black was fine, but the orange is terrible. First the roll is very poorly rolled, lots of overlapping, causing filament to get tangled coming off the roll, as the print goes on. Second, I've had quite a few "chunks" come out in the prints,
        Read more
By seu0301
product price FREE Shipping
Get free shipping
Free 5-8 day shipping within the U.S. when you order $25.00 of eligible items sold or fulfilled by Amazon.
Or get 4-5 business-day shipping on this item for $5.99 . (Prices may vary for AK and HI.)
Learn more about free shipping
on orders over $25.00 shipped by Amazon or get Fast, Free Shipping with Amazon Prime
4.6 | 1,676 customer ratings
89% of the ratings are 4-stars or 5-stars
It took me about 30 minutes to get everything dialed in on my SOVOL SV01 (direct drive). This filament seems happier when it is cooled faster. I was able to get it to print as intended with a 50C bed temp + aquanet hairspray, turning the bed off after the first few layers and a nozzle temp of 215C. When I tried printing at 220C-225C, it
        Read more
By Wheatley
Don't be fooled by that fact that this is essentially a brand new company with no track record, and has arguably the cheapest quality Filament on Amazon. I cautiously bought this filament and having just completed a 36 hour print on my Ender 3, I was pleasantly surprised by the end result.Despite the fact that this $14 filament this PLA
        Read more
By Kennychris
This stuff is the bomb! I have a small machine shop and print farm and mostly us the 3d printer for making fixtures and jigs in addition to lots a prototyping. This is by far the best stuff I have laid hands on. I have been through at lest 20 other brands hunting for easy to print tough PLA. I also bought Matterhackers Tough PLA and the
        Read more
By Bob Stringham
4.6 | 1,587 customer ratings
89% of the ratings are 4-stars or 5-stars
This stuff is absolutely amazing. It prints well and if you are willing to put some work into post-processing you will get results that you will swear are wood. This does tend to 'stretch' a little more than regular PLA and gives you a little more clean-up work. I made a spiral chess set (credit to BigBadBison on Thingiverse for the
        Read more
By Amazon Customer
Absolutely my favorite filament. I'm going to disagree with a number of previous reviews- when printed properly, this stuff looks, feels, and acts in every regard exactly like wood, and I have a background in woodworking. I fought significant stringing until I found that it likes a much cooler temp than regular Hatchbox PLA, which may
        Read more
By datac
Prints very nice, I use a heated bed at 60 c and a extruder at 220 c with a 7 mm retraction at 35 mm/s and printing at a 40 mm/s.It has a slight wood smell while it prints not like a wood shop but not like super cheap would smell either. Nor does the smell last long once it's done printing. It's quite easy to sand after and smooth out. I
        Read more
By Matthew C
4.5 | 5,667 customer ratings
87% of the ratings are 4-stars or 5-stars
* UPDATE: 11/4/2019 *I recently tested the new Overture PETG Orange and, as always, I could not expect anything else but great results. I printed a 3D Benchy at 150% scale in order to test stringing and bridging. Besides the line on the hull, a well known Prusa Slicer issue due to the way it prints infill and solid layers, the print came
        Read more
By Crystal L
So far so good. I struggled a little at first, mostly because I'm new to 3D printing and this is my first roll of PETG. But once I figured out why this stuff prints great. I'm using it for custom kayak parts.Printer: Ender 5Nozzle: .4 brass @ 260 (could easily print lower temps but it prints so well at that temp I'm going to continue
        Read more
By Donny
Never used a filament that was this horrible in my life of 3d printing. I tried printing this filament at 220 to 250c and no matter what temp i use the prints hardly ever stick and when they do stick they print for a small amount of time before cloging ur nozel every single time. And for what it does manage to get printed tends to
        Read more
By Mike
4.6 | 1,412 customer ratings
91% of the ratings are 4-stars or 5-stars
I've been using Overture PETG and I've been very happy with my results. I needed some white PLA, and when I read a review that said that Overture PLA didn't stick, I had to see if that was the case of if it's just another case of bad bed cleaning and a poor approach to 3d Printing that might be the cause.So I ordered a role of Overture's
        Read more
By GasPath
Just received my first roll of Overture PLA+. I hoped for the Space Gray but got black (see below). Regardless, I decided to proceed with printing and testing of the accuracy / temperature range. The first print I did was the Benchy Boat. I printed at 205c, 60mm/s, 0.2mm layer height, 60c bed, with a 20-line brim (to help with
        Read more
By Ashley C.
This is decent filament but isn't anything special and is very overpriced. Print quality is similar to ordinary Overture PLA and overhangs and details aren't any better. This is in contrast to some other PLA+ brands that offer superior print quality and colors. I cannot speak to the improved impact resistance that Overture claims as I
        Read more
By redraider72
4.5 | 4,642 customer ratings
89% of the ratings are 4-stars or 5-stars
MIKA3D Silk Shiny PLA 3D Printer Filament Bundle: Orange, Yellow, Lime GreenMIKA3D Silk Shiny PLA 3D Printer Filament Bundle: Champagne Gold, Pink, Pearl WhiteMIKA3D Silk Shiny PLA 3D Printer Filament Bundle: Pearl White, Ruby Red, Sapphire BlueMIKA3D Silk Shiny PLA 3D Printer Filament Bundle: Emerald Green, Pearl White, PurpleMIKA3D
        Read more
By Ana Mardoll
So I was originally going to give this 1 star due to constant jamming of my extruder with only this filament. However, after extensive testing I have gotten the settings dialed in to the point where I no longer have issues printing. I am using an original Prusa i3 Mk3 w/ 0.4mm nozzle and have to use the following settings in order to
        Read more
By James
Be sure to READ the title and don't get confused by the pictures, these are mini spools of 500 grams each, so you're getting 3 500g or 1.1lbs spools, a "traditional" spool is 1 kg or 2.2lbs and larger in size. Which you can get for $10-20 a spool of PLA, so unless you need these three colors you can find better deals elsewhere on
        Read more
By David Clunie
product price FREE Shipping
Get free shipping
Free 5-8 day shipping within the U.S. when you order $25.00 of eligible items sold or fulfilled by Amazon.
Or get 4-5 business-day shipping on this item for $5.99 . (Prices may vary for AK and HI.)
Learn more about free shipping
on orders over $25.00 shipped by Amazon or get Fast, Free Shipping with Amazon Prime
4.5 | 4,568 customer ratings
88% of the ratings are 4-stars or 5-stars
This is great stuff, i'm sorry for the people who had difficulty with it; i;m not sure what they did. first of ABS is acrylonitrile butadiene styrene, which is a copolymer. That is to say that its a blending of three different types of materials, acrylonitrile a poisonous liquid that provides a vinyl backbone of the filament. butadiene a
        Read more
By Xerath
Prusa MK2S - Hatchbox 3D ABS White 1.75mm.Since suggested print temp says 210c to 240c on packaging, I originally tried 235c with a bed temp of 85c and a density of 1.25 (per reading someone's info that I think was wrong). Lines were a little wavy and frayed. This test I was also using the sharpie trick of feeding the filament through a
        Read more
By Craig Garcia
Oh where do I start with this.......I ordered about 10 different rolls of ABS filament, some from the same supplier (Hatchbox, eSun, 3DSolutech, AmazonBasics) and have been printing all of them over the last couple of weeks. I have been printing with ABS for 6 months now and it is my go to filament, I am able to dial it in immediately,
        Read more
By Hunter Bernstein
4.5 | 4,483 customer ratings
87% of the ratings are 4-stars or 5-stars
This filament looks pretty darn cool when it comes out right. My first 4-5 prints all failed while I was trying to get the temp mixture right. I found that printing with the nozzle at 215C and the Heated bed at 60C (Using an Ender 3 Pro) yielded the best
        Read more
By Silmarilos
I really love the way this stuff prints! It's really smooth and the finish is very cool! BUT it did take a little dialing in to get it to work well. Specifically - this stuff likes to be cooled immediately. Take a look at the attached video for an example. The first segment shows a manual extrusion, no fan. Note how it self-retracts and
        Read more
By chicagodave
This is the most gorgeous gold filament I've ever seen! It was super easy to print too. Wow. Just wow. It looks like *real gold*! I've bought four different "gold" filaments and this one is like 1000x better than all of them combined. The others don't even *remotely* look like gold. This one, however, ACTUALLY LOOKS LIKE
        Read more
By Riskable
4.5 | 3,606 customer ratings
87% of the ratings are 4-stars or 5-stars
Wow, what a wonderful filament. First buy from this company, and I’m now a customer for life. Prints came out absolutely gorgeous with only a slightly higher temp than expected. Used on an Ender 3, 205c at the nozzle and 55c on a glass bed. I had 0 issues with layer adhesion, and it’s a pretty strong filament. Was worried about
        Read more
By BlackWolfe Technologies
First - folks have asked if there is metal (or even gold) mixed in the filament. No. (At $22 a roll, really?)It was very well sealed in a thick bag with all air removed. The bag is not reusable. They also included about 2-3 meter long samples of all of their "Silk" filaments and some nozzle cleaners. There is also an included card
        Read more
By OldGeek
I was looking for a PLA that would give me a good "metallic" finish and I believe I've found it! I had been using Rust-Oleum's Metallic Gold to prime and paint my prints, but after using this PLA I don't have to do that anymore! This silk PLA catches the light nicely for a true metallic look. I'll definitely be trying their "Silver"
        Read more
By Amazon Customer
4.6 | 1,178 customer ratings
92% of the ratings are 4-stars or 5-stars
It took me about 15 prints to get the perfect settings but it was WELL worth it. This stuff is flexible! It's stronger than you'd ever imagine! And with the right settings it prints better than my abs! I'm using a Ender 3 with the following settings. Print speed 30. bed temp 50. print temp 230. And the most important part was setting the
        Read more
By mason
Very pleased so far, initial testing is great. Softer than I thought it'd be, and I'm grateful for that; Ninjaflex is just too damn expensive. Printed on painters masking tape, or straight on Prusa textured sheet; bed 60, extruder
        Read more
By BPoster
I've been using Overture's PLA and PETG so when I saw they added TPU I had to give it a shot, and I'll add some notes here since there's no reviews on it yet. I got the blue and it's a bright, opaque blue - not transparent at all. The price is good for a 1kg spool, for some reason most TPU comes on 800g spools so I'm happy with that.The
        Read more
By Chris
product price FREE Shipping
Get free shipping
Free 5-8 day shipping within the U.S. when you order $25.00 of eligible items sold or fulfilled by Amazon.
Or get 4-5 business-day shipping on this item for $5.99 . (Prices may vary for AK and HI.)
Learn more about free shipping
on orders over $25.00 shipped by Amazon or get Fast, Free Shipping with Amazon Prime
4.5 | 2,897 customer ratings
88% of the ratings are 4-stars or 5-stars
First off, the filament was PERFECTLY wrapped around the spool. You know that "the feels" meme? ya..that!The filament prints VERY white which I was happy about. No gray or any other color in it. Just whiteI printed the soon to be painted Purple Worm as pictured above over the span of about 36 hours or so and it turned out great. I
        Read more
By Joe B
I bought this filament just for printing Lithophanes. This brand and type came recommended by a couple of different lithophane sites so I decided to give it a try. I tried printing at my usual PLA temps on my direct drive Artillery Genius (same as the Sidewinder, just smaller). I had stringing, oozing and warping issue just trying to
        Read more
By E. White
Review updated with testing on Red filament (in addition to Blue filament).Summary:Tested Red and Blue filament on Prusa printers. Jams consistently under 200°. Print at 215° or higher. Do not use for smaller objects or jobs requiring frequent retraction. Jammed rarely on on larger simple prints with a thick layer height (greater than
        Read more
By Metsys
product price FREE Shipping
Get free shipping
Free 5-8 day shipping within the U.S. when you order $25.00 of eligible items sold or fulfilled by Amazon.
Or get 4-5 business-day shipping on this item for $5.99 . (Prices may vary for AK and HI.)
Learn more about free shipping
on orders over $25.00 shipped by Amazon or get Fast, Free Shipping with Amazon Prime
4.6 | 1,144 customer ratings
89% of the ratings are 4-stars or 5-stars
I am beyond impressed by this filament! When I first saw this on Amazon, I thought the glow would be very subtle, even when exposed to a lot of light beforehand. I was very wrong!Pros:- The green glow really exceeded my expectations. It's actually quite vibrant, even next to some other lighted objects (I'll include a picture of a
        Read more
By Brandon Kovash
Glow time seems rather short. As far as printing, it worked well on its first runs. ... I tried charging it for some time - directly under a lamp, close in, for a whole hour. The glow faded fairly fast even after that. This will give you basic glow in the dark stuff, but don't expect it to be glowing even a few hours later. I wonder
        Read more
By Mjolnir
Hatchbox has a great reputation for a reason. I've had great success with all my Hatchbox prints. However, I can only give the glow in the dark filament two stars. It prints just as well as any other Hatchbox filament except it doesn't do the one thing it is designed to do, glow. I'm really not trying to be picky. It has an ever so faint
        Read more
By M.Clay
product price FREE Shipping
Get free shipping
Free 5-8 day shipping within the U.S. when you order $25.00 of eligible items sold or fulfilled by Amazon.
Or get 4-5 business-day shipping on this item for $5.99 . (Prices may vary for AK and HI.)
Learn more about free shipping
on orders over $25.00 shipped by Amazon or get Fast, Free Shipping with Amazon Prime
4.5 | 2,271 customer ratings
88% of the ratings are 4-stars or 5-stars
I got these filaments to use with the TECBOSS 3D Pen and they do not disappoint. So far, I have tried the red filament from the pack and I have not had any issues with it. The pack comes with a great variety of colors for a cheap price and there's bound to be a color that everyone likes. These filaments are of good quality and cool
        Read more
By Caren
So far, I give these PLA Filaments 5 stars! There are a very nice assortment of colors, each color is individually wrapped and you get a decent amount of each color too! I'm still a beginner with the 3D pen, but with this package and so many colors to try out, I'm sure I'll be a PRO in no time! I would definitely recommend this product
        Read more
By B1u3sky
I thought this might be a good way to get a bunch of colors for small print needs. I run 3 printers both professionally and personally and this stuff is the worst thing I have ever tried to print with. The dimentional consistency is BAD! Just in one small print it kept triggering my filament runout detector. The second one I tried was so
        Read more
By Yioos Surplus