Top Rated in Additive Manufacturing Products

Compare the most helpful customer reviews of the best rated products in our Additive Manufacturing Products store. These products are shortlisted based on the overall star rating and the number of customer reviews received by each product in the store, and are refreshed regularly.

Top rated products in Additive Manufacturing Products

4.7 | 1,999 customer ratings
95% of the ratings are 4-stars or 5-stars
I like this filament a lot, good color and quality. I use at 210°
        Read more
By MSK
I just finished running a spool of Hatchbox pla 1.75mm filament through my Monoprice mp select mini 3d printer and had no issues whatsoever. It arrived in a vacuum sealed plastic bag and on a standard sized spool. I will purchase more and give it a thumbs up!
        Read more
By DagDerNiT
I've had three horrible rolls compared to two okay ones. One roll was miserably tangled and would drag the filament roll and printer closer together. On the last two rolls the filament breaks without warning, and I'll come back to find the printer printing air. Worse still, I'll come back to find that the filament isn't even coming out eve
        Read more
By Kyle Smith
4.7 | 1,588 customer ratings
94% of the ratings are 4-stars or 5-stars
I did not actually use this for 3D printing. Instead, I used this to make "potion of poison" for each person in my D&D group. As it was a full party of 7, I wanted something affordable, but also personal enough to be from both me and my character (obviously a rogue, yes, because what other class would think it's totally acceptable to give
        Read more
By Kindle Customer
Resin arrived past its expiration date, though just barely. I attempted to print with it to see if it would work but sadly I had issues with the prints being too soft or sticking to the vat after a few layers. All other resins from Anycube have worked great.

Update: I contacted their support and Ferry with Anycubic has been fant
        Read more
By Kyle
I'm new to 3D printing but have been using this resin with an Anycubic Photon. Prints have been exceptional using the mfg resin and I especially like using the Grey for D&D minis as it shows the incredible detail obtainable from the printer/resin combo. The price is very reasonable for a product of consistent quality. I filter and store
        Read more
By sa418
4.7 | 1,566 customer ratings
92% of the ratings are 4-stars or 5-stars
This resin is great! Compared to other resins it doesn't have a strong odor, less hazard compared to other brands (still wear gloves and clean up!) and it comes out beautiful. Though the resin is pretty sticky/syrupy compared to other brands.
        Read more
By brian
To be fair, this is the only resin I have used, I started with it since I bought an Elegoo brand 3D printer and figured for the first few bottles I would use their brand to be safe. Since then, I have continued to buy just this resin. The color choices are great, I have used the grey, white, black, and clear red so far and they have all
        Read more
By Sage
Works fantastically and has a much more mild smell compared to the anycubic resins. I used it with the Anycubic photon and found very little post-processing necessary with most pieces. (Complex prints might need more)

To share my settings:
Layer thickness: .025mm
Exposure time: 7.5 seconds
Off time: 3.5 seconds         Read more
By Dave
4.7 | 776 customer ratings
94% of the ratings are 4-stars or 5-stars
If only I knew to buy this when I bought my 3D printer, you wouldn’t think it makes a difference since the filament just passes through it. Well I promise you it does, I immediately ran into less issues and better prints after installing this. I wish I had bought it when I bought the printer.
        Read more
By caleb
The Capricorn tubing is supposed to print flexible filaments better because of the higher tolerance of the inside diameter of the tubing. I cant speak to that because I haven't ever tried a flexible filament. However, this tubing has a higher temperature rating than the white stuff that comes with most printers and I have noticed that it d
        Read more
By Borgkube
These guys accidentality sent me 120cm of this tubing instead of 1 meter which I was very pleased about. This is my first time using capricorn tubing and I can immediately tell the difference in quality compared to what my Tevo Tornado came with. Cutter and couplings work perfectly too. The results have been nothing less than amazing and I
        Read more
By Pete
4.7 | 765 customer ratings
93% of the ratings are 4-stars or 5-stars
Nicely marked with their sizes. And the sizes are quite accurate, and quite consistent. I measured each tip.

I measured them using gauge pins, checking which size pin would go through the hole, and which size would not. The pins come in 0.001" increments, letting you determine that the hole is bigger than XX (that pin fits throu
        Read more
By RedO
I've replaced the original .4mm Ender 3 Pro nozzle with one of these and I'm totally happy with it, for PLA. I don't print other materials...
        Read more
By HighRiver ForestRun
My experience with these nozzles: At first, these nozzles seemed good but then I found that many of the nozzles have threading issues. I am not gonna ruin the internal thread of my hot end by forcing these nozzles in to work. Then, a few weeks later, I noticed on a nozzle that did thread okay, did not lay down a tried and true filament, ev
        Read more
By Amazon Customer
4.8 | 295 customer ratings
95% of the ratings are 4-stars or 5-stars
I have been resin printing for about a year and a half. In that time, I have tried my fair share of DIY washing and curing setups. From multiple jars of IPA to UV Lights glued onto containers, or just leaving prints outside in the sun, I’ve tried it all.

I recently learned of Anycubic’s Wash and Cure station and decided to g
        Read more
By Kody D. Belshe
I expected this device to be a positive improvement for my 3d printing, but I hadn't anticipated the kind of difference it would make.

Like most people I saw this device, thought "Eh, kind of interesting, but it just does things I already have a set up for." Eventually though I was convinced to take a chance on it (being stuck a
        Read more
By Kevin Waterman
I bought a Photon S a while ago and been very happy with the overall quality of it. Was excited when i saw they had came out with a all-in-one wash and curing station. So far i have not been disappointing. Great quality as expected.
my set up before i had to have different stations one for cleaning and one for curing. With this set up
        Read more
By T L Computers 505
4.6 | 1,642 customer ratings
91% of the ratings are 4-stars or 5-stars
I ordered the Elegoo Mars around the first of the year. My experience has been positive overall. The support is very good, and I found that using the facebook Elegoo Mars group is very helpful as well. Some pros and cons:
Pros:
-Very easy to set-up and use (software is relatively simple to use). Far fewer settings to adjust vs FD
        Read more
By Scott Presbrey
I could only print half of the test object and it failed. Maybe its user error on my part but t seems like it should be able to pring the test that came with the usb, which took 12 hours, should have been something smaller and faster, I will update when the second attempt is done.

Edit#1: After emailing the company I was respond
        Read more
By Amazon Customer
Coming from ZERO, 3D modeling skills. Now one week later. I can do basic modeling, and proficient knowledge in using slicer software and mesh softwares...

This machine was my entry point into the world of 3D printing. With years of window shopping for printers, I simply could not resist to take a look at this printer and jumped
        Read more
By J. Pham
4.7 | 460 customer ratings
94% of the ratings are 4-stars or 5-stars
I was looking for something to make tabletop miniatures with that wouldn't break when dropped, especially if the minis have small weak parts, like swords. I was using Elegoo, Anycubic, and Sainsmart resins in the past, and while they are all good, they were all brittle. Trying out the green Siraya, and so far, so good. It prints quickly wi
        Read more
By Liam Craig
Great resin to use. The color shows the details. The picture of the failed print was user error, not enough supports. Printed on original photon. i have used about 5 liters of this and it is now my favorite go to resin.
        Read more
By Maria Williams
So this is a great value, great grey color and prints detail fantastically. The non-brittle claim on the other hand is a little unfounded. This resin will snap if you flex it very far at all or impact it sharply, it doesn't appear to be any less brittle than Elegoo or Nova3D resins...
        Read more
By Jeff G.
4.6 | 1,118 customer ratings
89% of the ratings are 4-stars or 5-stars
If you have a mk3, copy the following into a text file name it 'sainsmart.ini' and then load it into slic3r. It will me the difference between ugly and messed up prints to beautiful output

bed_temperature = 70
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 1
extrusion_multiplier = 1.03
fan
        Read more
By cosmickatamari
Just received my first reel of this material and I must say that I'm quite pleased. I print a lot of flexible filament (Ninjaflex and Filaflex) and this material compares favorably.

Unlike the Sainsmart ABS, this filament comes on a plastic reel with a "standard" size bore, so it will fit on most printers. I checked ov
        Read more
By Scott B.
Update 1: Sainsmart contacted me and offered to replace the bad rolls and give the filament another shot. I gave them my address, etc., but a month later and no filament ever showed up, so I'm keeping this review at 1 star. If the new filament ever shows up and it works out, I'll update this review.

Update 2: Sainsmart shipped t
        Read more
By Kindle Customer
4.6 | 1,008 customer ratings
91% of the ratings are 4-stars or 5-stars
This is a reluctant review because I don't want anyone to know how great this stuff is for the price. Every time I find a great resin, the price goes up astronomically. I have been consistently printing on my Anycubic Photon at settings of Layer thickness .05, Exposure of 11 seconds 1 second off time, 5 bottom layers at 95 seconds. I ha
        Read more
By Dr D.
The manufacturer recommends shorter curing times for this resin, but I ran the Resin XP test and found that 15 seconds with 0.05mm layers worked best. I use 15 second regular layers, 5 seconds of off time, and 10 bottom layers with 60 seconds of exposure. I’m getting consistent successful prints. Chess pieces come out with a brilliant
        Read more
By Scott Campbell
The bottle came packaged in a tight fitting air cushion inside a double walled box. No leaks unlike some other brands i have used. Cure times are virtually the same as wanhao and anycubic fast resins. Bed adhesion has been flawless and there's been no failed prints so far. The image i posted shows the clear with some pigments added to simu
        Read more
By bootdsc
product price FREE Shipping on your first order. Details
4.6 | 815 customer ratings
90% of the ratings are 4-stars or 5-stars
I'm fairly new to 3D printing and was getting a bit discouraged with my results. I decided to give the Creality Ender 3 Glass Bed a try to see if it would help. It was a few dollars more than a few others I looked at, but it did not look like it was just a piece of cut glass that I could cut myself and it's not. The "microporous coating" l
        Read more
By DPeter2101
My Ender 3 Pro came with the magnetic print surface a lot of people online are making a fuss about. No more having to use a scraper to get your print off the bed. Just remove it, flex it and peel off the print! Magic! Yeah, for the first 20-30 prints. Then, I noticed that there were creases in the sheet that would not self level. Printing
        Read more
By G. Martin
I am printing with PLA, and after the first couple days of printing on the 'sticky' side that has the printed dot pattern, I started running into problems with my prints not sticking properly. I had corners peeling up and small details were just not adhering well. It would take 2-3 starts before I could get a print to stick 'sort of' well.
        Read more
By Paul
4.7 | 307 customer ratings
93% of the ratings are 4-stars or 5-stars
We go through a crazy amount of nozzles.. So a package with quanitity is good. But with quantity must come quality with nozzles. So i decided to take a better look at the inside of these nozzles. Ive ordered cheap nozzles and the nozzle hole was oval and chunky but as you can see, these are PRISTINE. WOW!!! The prints really have been spec
        Read more
By Jillian Starcher
Great quality nozzle. I did cold pull and it came off so easily and clean. Print quality is great. I do recommend this item.
        Read more
By emredikici
Instead clearing any clogs or anything, I just swap a nozzle out. The price is right. When in doubt, give a swap. They seem good.
        Read more
By Paul Shapiro
4.5 | 2,636 customer ratings
88% of the ratings are 4-stars or 5-stars
I purchased this printer a few months ago. It has been a dream to use. I would definitely recommend this as a great printer for anyone starting out with 3D printing or even for veterans that want a more compact and reliable unit. I am extremely impressed.

Setup
The setup was fairly straight forward. It took me about an hour
        Read more
By Ben
My printer's bed came severely warped. Warped enough that I could not print anything. I contacted Comgrow and they were nice enough to immediately ship me a new bed! After the new bed was installed, it printed like a dream! The only experience I've had with FDM printers is the makerbot replicator 4 and it was a nightmare to use. This one
        Read more
By Defluo
You might be able to assemble this printer in a couple of hours but you can't build it in that time. There is a significant difference in building something correctly and assembling it. Assembly is the easy part, anyone can throw things together. The build is now complete and to do it correctly takes 4 to 5 hours.

When you st
        Read more
By Roger T. Moore
4.6 | 512 customer ratings
91% of the ratings are 4-stars or 5-stars
UPDATE: 16 June 2020
The replacement kit arrived from the seller, and everything works perfectly. I would absolutely shop with this seller again, as they quickly reached out and actually solved the problem I was having. This has been among the best experiences I have had on Amazon, to date!

UPDATE: 08 June 2020
After
        Read more
By vo
I ordered this to immediately upgrade my Ender 3 pr. I was skeptical of this because it was an all in one kit, but the result was great. I'm really pleased with the difference in the springs. The bowden tubing is enough for 2 machines. I put the metal extruder feeder on during setup, so I wasn't able to compare print quality, HOWEVER, the
        Read more
By Denise E.
Works as it should, fairly easy to install if you have pulled the original off of the printer. I did not splice and reconnect the new wiring, i just pulled my old heating element out and replaced it into the new heating block. I had a bad leak around the bowden tube of my original block, so buying this with the Capricorn tubing was better
        Read more
By Ed R.
4.5 | 2,323 customer ratings
88% of the ratings are 4-stars or 5-stars
This was a great set of sample colors to go with my new 3D Pen. THere's enough variety to make some interesting objects without running out. But, once you have a palette of colors you like to use, it probably makes more sense to buy larger spools of those colors. I'm almost out of the silver and the blue. I love that there were several
        Read more
By Linzart
Nice selection of colors in good sample lengths. Some of the colors I haven't seen in any other assortments (and I buy A LOT of assortments): the "metal bronze" is more of a metallic goldish green, almost metallic chartreuse, and the six transparent colors are very light, perfect for subtle jewels, vehicle lights, etc. None of th
        Read more
By Aldo Ross
We purchased this to accompany the 3D pen that we purchased for our daughter. This kit comes with a wide array of colors and a very generous amount of each one. The price was right and each filament has fit perfectly in the 3D pen we purchased. Be sure to check the mm size of filament that your 3D pen uses to make sure it is compatible.
        Read more
By MrsManders
4.5 | 1,942 customer ratings
89% of the ratings are 4-stars or 5-stars
I am a first time 3d printer owner, and this printer came highly recommended... and I have to admit while most of the problems I have had have been simply due to my lack of experience... I was frankly shocked by the lack of support from Creality. the magnetic mat is cool, but got scratched thanks to my improperly leveling the bed, I just w
        Read more
By Michael J. Crawford
As a beginner printer, the Ender 3 line is extremely popular right now. And for very good reason:

* Excellent price point puts the base model under $200 and the "pro" model under $300
* Outstanding print quality that rivals much more expensive printers
* Strong, growing community - just search Thingiverse for "ender 3
        Read more
By Kurtis Miller
I am completely pleased with this printer and don't see spending more money would add any value or improve prints, all around excellent.

Product arrived perfectly, excellent packaging, all parts included, no hardware issues.

This is my first 3D printer so I want anyone new to 3D printing to have a realistic perspectiv
        Read more
By photonashville
product price FREE Shipping on your first order. Details
4.7 | 265 customer ratings
96% of the ratings are 4-stars or 5-stars
Wonderful and you dont need it to have a hole prepunched at all you need to do is poke threw the film while holding the metal plates together with your screw driver and put the screw in it doesnt hurt anything and I'm sure its a lot faster that way that work wonderful for me !!!!!
        Read more
By Mufinman
if I knew I was getting blank FEP film with no holes punched, I would've bought elsewhere for twice as many replacement films at the same price. I bought these expecting it to be ready to install. very disappointed that it's not.
        Read more
By trent garners
For those just barely getting into Resin printing like myself, you're going to make a lot of little mistakes along the way that can ruin a whole print job like pausing it for too long and waking up to a 80% done print job hanging on your platform. And a ruined print job means lots and lots of careful cleanup and restarting.

Taki
        Read more
By M
4.6 | 436 customer ratings
92% of the ratings are 4-stars or 5-stars
Great light for curing my 405nm resin parts. In the chamber I made it only takes about a minute to finish cure a part. Don't need any more power than this.
        Read more
By Chris
There is an on/off switch in the power cable, an unexpected treat. I used an empty dishwasher pod container and lined it with foil and cut a hole in the lid for the light. It works great, but I have a little turntable that will go into a slightly bigger foil lined box for the final home.
        Read more
By Len
Using this for my 3d printer clean up. The strainer is small enough to not let cured resin through and the clean up is easy.

The silicon funnel is perfect! It fits the resin bottle and even with the strainer full of resin it doesn't collapse or wiggle around. Giving me a secure platform so I can use both hands to hold my vat whe
        Read more
By Deanna
4.5 | 1,336 customer ratings
88% of the ratings are 4-stars or 5-stars
This printer is a huge step up from FDM/FFM (usually melted plastic) printers, but please take some time preparing before you start if you want a good experience. Anycubic support is excellent, and there is a large Facebook group full of Anycubic Photon owners willing to give advice and to help you troubleshoot any issues. The printer co
        Read more
By Scott Campbell
This is my first SLA printer, I got it couple of months ago. Finally decided to share my prints and my experience.

It's compact, a well designed and well built printer. Print quality is amazing, superior than one could expect from such a budget priced machine. Some reviewers wrote here that it’s not appropriate for a jewelry m
        Read more
By David
I'm a 3D printer hobbyist with 2 FDM printers. I needed a printer that could print finer detail. I decided to try the Photon after seeing good YouTube and Amazon reviews. I've had my AnyCubic Photon for ~2 months. I'll share my experience:

Pros
1. It makes amazing prints. I'm printing at .05mm and am thrilled with the print
        Read more
By Christopher D Knox
4.5 | 988 customer ratings
87% of the ratings are 4-stars or 5-stars
TecBears PLA filament is great stuff. I have no issues with my first roll at all. Prints go down nice and smooth and stay adhered to the bed at 70c and printing is done at 210c. Durability of this filament is tough as well as I have been printing over 18hrs for 120 LED clips for my Xmas ws2812b lights.
        Read more
By Martin Gundel
I'm fairly new to the 3D printer scene, it's been a new hobby I started this summer (2020). I've purchased thirteen different filaments from four different manufacturers so far. I've been satisfied with all of them except for one (a silk silver from Yousu). When Tecbears offered to buy a spool for me in exchange for a review (full discl
        Read more
By AmazonFox
I’ve been using this filament for a month now and it’s been fantastic. Comes packaged tight and super sealed to not let moisture in. Absolutely no problems with it sticking to the bed of my Ender 3 Pro. No breakages. Would definitely buy again.
        Read more
By Dustin