Top Rated in Hydraulics, Pneumatics & Plumbing

Compare the most helpful customer reviews of the best rated products in our Hydraulics, Pneumatics & Plumbing store. These products are shortlisted based on the overall star rating and the number of customer reviews received by each product in the store, and are refreshed regularly.

Top rated products in Hydraulics, Pneumatics & Plumbing

4.8 | 414 customer ratings
95% of the ratings are 4-stars or 5-stars
We bought the hose to extend our mid pressures misting system. We are running 250 psi through it. Fits perfect.
        Read more
By Joy Pride
I needed some pneumatic tubing for the drain line on my refrigerated air dryer. I’ve worked in the building and process automation fields, for many years, and know that it’s worth paying for good quality pneumatic tubing. Especially, if it’s going to be exposed to cold temperatures. This isn’t the least expensive tubing that Amazon
        Read more
By William J.
Good quality. This is not some cheap Asiatic caraaaappola. Better get yourself some while there is any left. I use it to replace the cheap airlines that go to my air shocks on my truck. This tubing is a lot thicker and tougher.
        Read more
By Jim
4.7 | 504 customer ratings
92% of the ratings are 4-stars or 5-stars
Picked this up to use with my new Camp Chef stove. I changed the hose to a longer length with a quick connect. Had to use This Anderson Fitting to connect the original Camp Chef hose and regulator to a new matching Quick Connect.
To Convert the Original camp Chef hoes and regular so it can connect to the 12' hose so it can still r
        Read more
By Kadien
Fit perfectly on my MasterCool Vacuum pump. I was looking to improve my vacuum times, I recently purchased a Yellow Jacket vacuum pump tree that had a 1/2" connection. The original connection was 5/16" and 1/4", which wouldn't work. This connection worked flawlessly, I tested it last night on a 30lb recovery bottle. I was ab
        Read more
By Wingnut
Anderson Metals Brass Tube Fitting, Half-Union, 3/8" Flare x 3/8" Male Pipe
Arrived in good condition, as advertised, no problems with installation.
would purchase again.

I do not know the seller and did not receive any money or product for my review
190221 2153
        Read more
By Runion
4.7 | 405 customer ratings
93% of the ratings are 4-stars or 5-stars
I have no clue why I bought this or where I put it.
        Read more
By Amazon Customer
I bought this to replace the piece of junk "1/2 to1/4 Anderson Metals Brass Threaded Pipe Fitting" that I ordered a week ago for $5.68. What a drastic difference with this NIGO 1/2 to 1/4 bushing for $5.89!!! This NIGO bushing is high quality with every part of it beautifully machined and perfect threads. The brass has a hefty feel to i
        Read more
By Frank A
It does what it's supposed to, and the quality of the product is excellent. If you're looking to adapt a diverter to a garden hose, this is the correct product you should be using. Not really sure what else can be said about it.
        Read more
By S.C.
4.8 | 133 customer ratings
98% of the ratings are 4-stars or 5-stars
I like these so well couple with Pony clamps to make wood clamps out of them. I plan on buying a five pack of 36 inch and later a five pack of 24 inch to make more wood clamps out of them. They are excellent product.
        Read more
By Richard J. Marsh
These heavy duty pipes came wrapped well with thread protectors. Keep in mind if you plan to incorporate these with furniture as I do you will need to sand them down and paint them since they are meant for actual plumbing not finished furniture. The pipes are made very well and the threads work perfectly with the 3/4" flanges I plan to use
        Read more
By RT
I had purchased these pipes with the purpose of using for decor. They would serve as shelving supports in my laundry room as they are attached to their matching metal flanges anchored into the wall. They are in great condition and more than serve their purpose. The only thing that caught me off guard was that in handling the pipes, my hand
        Read more
By Craig Osekowski
4.7 | 213 customer ratings
93% of the ratings are 4-stars or 5-stars
I got this ball valve to install between my COLD and HOT water lines and the pipe to the outside patio faucet, so I can select HOT or COLD water to the outdoor faucet. That way I can fill my hot tub with HOT water and use it the same day - instead of dragging a 100' hose through the house to the basement water heater. And I can easily swit
        Read more
By Troy Hummon
This valve is just the thing for switching air/argon on my Primeweld ct520d for switching between plasma cutting and Tig welding. Needed to reverse the handle for clearance, so it's not intuitive which way the valve is open, hence the markings on the box. Left quick release hose is air in. Clear hose on the right is gas in, bottom clear
        Read more
By d4ve
Nice valve, works great to expand a heating zone in my basement off my first floor heating zone. I can select to have forced hot water flow through to my basement on the way to my first floor, so turn off the basement and have it the original way (a poor mans zone). More importantly there is no configuration (even half way) that you won't
        Read more
By DoverNH
4.6 | 653 customer ratings
89% of the ratings are 4-stars or 5-stars
I purchased this tubing to function as a one-maned brake bleeder tube for bleeding my vehicle's brakes. It worked perfectly and the diameter is just right. In order to make a secure connection, I used a zip tie at the end so that the tubing was air tight and did not let any air bubbles in. It worked great for both front and back brakes!
        Read more
By Reviews and Suggestions
Used this to re-hose a backpacking water filter. The original hoses were yellowed and starting to get brittle. This product fit the Katadyn filter perfectly and was way cheaper than their official kit.
        Read more
By azbearhuntr
Buying this tubing on Amazon seemed crazy as they do have it at Ace Hardware. However I found that sometimes the tubing at Ace has been on the spool so long it is flattened and distorted. This was loosely looped and unrolled and uncurled after few short hours. Also I could be be sure of the specs exactly. Home Depot is even worse. I was ab
        Read more
By Kindle Customer
4.6 | 461 customer ratings
90% of the ratings are 4-stars or 5-stars
This connector is made of solid brass, not an alloy. It is very durable with well defined barbs. A very well manufactured product.

I used this connector to connect a low pressure air pump to a PVC line, for my hydroponic systems. This connector worked well for me.

I would recommend this connector to others...
        Read more
By ChuckleHead
I bought the 1" Barb x 3/4" Male Pipe fitting to replace the steel pipe setup from the well that always rusts and leaks due to the very acidic water in the area. This is a very heavy duty brass fitting with a thick wall. The barb is big enough for two pipe clamps and fits securely in the black pipe coming from the well. It helps
        Read more
By Happy Trails
This adapter definitely not a Pro-grade adapter:
- the quality of NPT thread is not perfect,
- the thickness of barbed fitting is not enough in comparison with the Pro-grade adapters,
- the barbed fitting is extremely short (just 4 barbs) in comparison with the Pro-grade adapters (7,9,11 barbs). That means there is no room t
        Read more
By Boris Romanov
4.6 | 363 customer ratings
91% of the ratings are 4-stars or 5-stars
The product has great quality! I used it to replace the old tube and it's much stronger! Love it!
        Read more
By Amazon Customer
It looks like a high quality nylon tube, and it perfectly matches my 1/4 OD fittings. This tube looks very thick, hard and strong. I put it on my truck.haven’t had any issues after two thousand miles of use
        Read more
By Jocelyn
The hose works for me.
        Read more
By roblee futch
4.7 | 152 customer ratings
94% of the ratings are 4-stars or 5-stars
fits like a glove... would by again if needed.
        Read more
By Jeffrey Desdunes
Real nice quality
        Read more
By roy shideler
I haven't used this splitter yet in my irrigation system, but will shortly. I'm sure it will work, but I wish it had come with 3 hose clamps. I had to buy those separately.
        Read more
By Bill Williams
4.6 | 279 customer ratings
91% of the ratings are 4-stars or 5-stars
trying to be the fun grandma isn't always easy so I search for extreme values to keep my grandchildren busy! I am looking forward to making lots of chunky water bracelets from this tubing. I will definitely buy again if needed.
I received it quickly
tubing is good quality and color (crystal clear).
Less than 25 cents per foo
        Read more
By Nellie F
Purchased this tubing as an oral motor tool for students with special needs. They attach a short length to a pencil and chew on it for sensory input or anxiety. So far, so good! No plastic chemical smell (which you still get with some therapeutic catalog tubing) and it's holding up under the daily use of some of my toughest chewers.
        Read more
By Andrea
I doubt I'm using this hose for what it's normally intended for, but it's working great for changing the oil in my small engines. I found a YouTube video online showing how to create an easy way to change your oil and it required about 6 ft of this vinyl tubing, so getting 10ft gave me room to mess up (which I didn't). This hose serves a
        Read more
By Michael
4.8 | 88 customer ratings
94% of the ratings are 4-stars or 5-stars
Installed a RO Water Filtration System with water to sink mount dispenser, refrigerator water and ice maker. Needed two valves and a T- connector to complete the job. This package of 20 items cost less than half of what the local big box stores wanted for just the three parts required. These connectors work as well as the ones which ca
        Read more
By Granny Susie
I needed to add a few more micro-irrigation lines in my hard, but the existing lines were way to hard and sun-baked to easily add new lines. So I decided to take a chance that these connectors would make adding new lines easier, even though they aren't for that purpose. They worked like a charm! A simple way to connect new lines to 1/4"
        Read more
By AT
I have purchased several 100 watt halogen replacements over the last couple of years. These lamps are the closest in brightness to a halogen 100 watt bulb that I have found. They are 90 percent or so as bright and the frame is larger than the 100 Watt E11 halogen but not by a large margin. This is a big step compared to other LED replaceme
        Read more
By jjv
4.6 | 164 customer ratings
89% of the ratings are 4-stars or 5-stars
The check valve failed on my Central Pneumatic 29-gallon compressor. An exact replacement check valve was impossible to find (3/4" male port into the tank, 1/2" male port from the pump, and 1/8" female port to the unloader). I found a common replacement check valve with a similar configuration, but different sized ports (1/2" male port to
        Read more
By Will H
I’m using this to attach my son’s Phthon aquarium water changer to the shower head. I had a very difficult time finding the correct size fitting!
        Read more
By Kristelg
I got this to hook up a hose to the spare shower in my apartment. It leaked at first but worked fine once I used plumbers tape. Now I can clean my balcony easily and when ever I want.
        Read more
By Shopoholic
4.6 | 148 customer ratings
92% of the ratings are 4-stars or 5-stars
The bigger cutoff valve you see in some listings (big blue handle wider than the body) was dripping at the handle so I order this to rework the system. (espresso machine water feed.) Those valves are hard to turn... these are smooth and easy to turn... and don't leak. Hook up was solid. Installed 8 of these parts... no leakers when I t
        Read more
By M. J. Civello
I gather these are the ones that break down and leech into your water - Could be wrong. I'm using some of these fittings on the drain from an RO system to divert waste water to a jug that sometimes waters plants or flushes toilets. Insufficient information in the listing re plastic and o-rings to use them on the supply side.
        Read more
By JHexatthewheel
These feel extremely cheap. The price was more than okay - but they're not great quality. I'm not exactly sure what the little C clips are for I've never seen those on RODI units or at least I've never paid attention to one having them. Overall not impressed. Buy from a quality supplier like Bulk Reef Supply or your local hardware store.
        Read more
By T Griffis
product price
4.7 | 90 customer ratings
92% of the ratings are 4-stars or 5-stars
Worked well to replace the boom cylinder on a Terramite T5c.
Had to get some SAE8 X 1/4” adapters to fit the existing hoses.
The bottom mount was a bit tight, just ran a flap disc on each side a bit. Then it dropped right into place. Appears that it would also work for the stick and bucket cylinders even though the bore is a b
        Read more
By cSutton
Excellent product for the price, it uses an O-ring fitting on the cylinder. It is universal though, it may require custom fitment. Same price as a rebuild kit for my skidsteer, can't beat brand new versus rebuilt.
        Read more
By Amazon Customer
I purchased the cylinder to use on the tilt of my Tractors front end loader. The install was simple and straight forward. Simply install a pin at each end' add the hydraulic lines and off we go. The cylinder worked well for the first load or so. Then the problem came when the cylinder shaft bent. Mind you the old cylinder on the other side
        Read more
By Ben Coffman
4.7 | 91 customer ratings
90% of the ratings are 4-stars or 5-stars
Bought to use as a water level to re-level home. Flexible and tough - great value.
        Read more
By Lewis Rogers
Using in the garage to replace some vacuum hoses and low pressure air lines. Works great.
        Read more
By Cruise
Purchased as replacement for humidifier drain line. This product works great for its intended purpose.
        Read more
By RLB DAB
4.7 | 86 customer ratings
91% of the ratings are 4-stars or 5-stars
I have two medium size (20 gal) air compressors and use small amounts of compressed air every day. Useing these valves as mainline cutoffs allows me to simply unplug the compressor/s until the pressure drops down to about 60 PSI then plug it back in for a single run cycle. This way each compressor only runs a few cycles each week.
<
        Read more
By Willie X
Arrived quickly, works perfect. Was exactly what I wanted. I use it to supply propane to my forge burners. I like it.
        Read more
By Ralph H Hecht
Legs for my campstove do not allow for the gas bottle on the side. I ordered a 3 foot hose with fittings and added this valve as a safety measure.
        Read more
By RWalker
4.5 | 190 customer ratings
87% of the ratings are 4-stars or 5-stars
Had to replace my in ground pool spa air switch hose and the “pool store” replacement hose was difficult to find or too expensive. This tubing fit perfectly was clean and packed well and would certainly buy again.
        Read more
By Stijl
Tubing Inner Diameter is 3/32". That missing 1/32 may not be significant for many applications, but makes a difference when you need the full 1/8". Outer diameter is accurate at 1/4 (full 8/32")
        Read more
By Aegis
Title, description, and pictures stated “clear” tubing which is what I need for my application. This has writing alllll over it.
        Read more
By John h.
product price
4.7 | 77 customer ratings
95% of the ratings are 4-stars or 5-stars
My back flow valve was leaking badly after turning the irrigation system back on this year. Failing and inspection is a punishingly costly mistake in my city so I needed to do something quickly. The kit arrived and in ten minutes my leak was fixed and I passed this years inspection and saved a bundle by doing it myself.
        Read more
By Organic Gardener
My big reservoir was leaking. Turns out my big rubber seal was just hard from time and sun. Took everything apart and replaced all the internal parts with this kit, including the rubber seal and it works perfectly. No drips. Very happy.
        Read more
By WooPigFoodie
Moved into a new home that has been vacant for 5 years, when I fired up the sprinkler system I discovered a small static leak in my Febco 825Y 1" valve. The Febco site was exceptional in providing a complete parts breakdown along with a terrific YouTube video that walked me through the entire process of how to replace all gaskets and o-ri
        Read more
By Amazon Customer
4.4 | 624 customer ratings
86% of the ratings are 4-stars or 5-stars
This is the only shower adapter the correct size to extend a shower fitting past granite wall tiles. Thank goodness Amazon carries it!
When we put in a new shower system, the faucet pipe was installed 1" behind the cement board, and granite on top. The arm we used is square, where a round shower arm would have fit into the hole (b
        Read more
By Old Alice
I have received 2 different versions of the "same" 6120-0404 fitting. The version available in 2017 (there is still some old stock) was 1.25" total length. The new version is 1" long but they shortened the fitting all in the 1/4 NPT male section. The male threaded section was reduced by 1/4 inch. The first one I tried didn't seem to be get
        Read more
By NY Scott
I ordered 2 of these, 1/2" male NPT to 3/4" Female IPT. The 3/4" F side seems to be a different thread type other than IPT flare, neither will screw in more than 1-1/2 turns. Took all my parts up to Home Depot to determine which parts were wrong, the 3/4 inch female side is a different thread (not GH), may be a strait, IDK but HD didn't ha
        Read more
By jm
4.6 | 83 customer ratings
89% of the ratings are 4-stars or 5-stars
So far they are doing their job. These o rings are the size XSPC used focr their 3/8ths g1/4 barb fittings for computer (pc) watercooling so I got these for replacements for periodically rebuilding and and flushing/cleaning the loop
        Read more
By Nick D.
These made very cute chainmaille bracelets.
        Read more
By Jan G.
Very poor quality. Excess flashing on both inside and outside on all o-rings on what looks like a glue line(?), not to mention they are undersized in all dimensions. Not at all manufactured well and certainly doesn't match what's shown in the ad photos... those must have been hand picked to misrepresent the ones they actually sell. Don'
        Read more
By Curtis