Top Rated in Industrial Brakes & Clutches

Compare the most helpful customer reviews of the best rated products in our Industrial Brakes & Clutches store. These products are shortlisted based on the overall star rating and the number of customer reviews received by each product in the store, and are refreshed regularly.

Top rated products in Industrial Brakes & Clutches

4.7 | 94 customer ratings
93% of the ratings are 4-stars or 5-stars
Worked great and is good quality. Dont even bother to try to repair your old one. Its that
        Read more
By mary
worked as designed, easy to
        Read more
By C.Webb
Simple screw on installation. Works
        Read more
By ANTHONY H.
4.7 | 90 customer ratings
93% of the ratings are 4-stars or 5-stars
As I was already going through the trouble of replacing the muffler & manifold, I decided that it would be a good idea to install another one of these as the original one was long gone. This Stens deflector appears to be better made than others I looked at here on Amazon, and they don't waste time and material on paint for it that's just
        Read more
By Old Grouch
I like the price very good value. It fit my single cylinder kohler, had to give the bolt holes a little more clearance with a larger drill bit. Now the exhaust noise goes out the front. Now i am very
        Read more
By Bruce R.
fits, but didn't come with mounting
        Read more
By nathan kurisu
4.9 | 35 customer ratings
100% of the ratings are 4-stars or 5-stars
Fits my Stihl ts420 perfect. I can now run 20mm and 1inch arbor blades on my saw. Stens makes a great product. Checkout there pull start rope if your looking for some. It's the best out
        Read more
By Anthony C.
Perfect
        Read more
By Dustin
Arrived on time and they fit
        Read more
By Chris
4.9 | 28 customer ratings
100% of the ratings are 4-stars or 5-stars
as advertised easy in and fixed the
        Read more
By WESLEY BROOKS
Great
        Read more
By Percy Jones
Dont spend a bunch of money on high end air filters at the cart shop...this works great and fits great. I have a 1996 Medalist EZGO and this fits
        Read more
By Jerry D. Bicknell
product price
4.9 | 27 customer ratings
100% of the ratings are 4-stars or 5-stars
Thought I was going to have to get a new chain saw. This saved me tons of $ and was easy to replace. Time will tell how long it
        Read more
By gnomehole
Easy to install no
        Read more
By Bobby G.
ok!
        Read more
By megahugro
4.8 | 27 customer ratings
94% of the ratings are 4-stars or 5-stars
Easy to cut to the correct length. Now have a lifetime
        Read more
By Auzzie2
Now I can make my own keys, no matter what length I
        Read more
By MikeBWCA
I couldn't find one of the right length in the big box stores, so I bought this. Way more than I will ever need. I used this to pair a replacement pressure washer pump to a briggs and stratton 6hp intek 190 engine (from a generac pressure washer). It fit perfectly (of course I had to cut it to length
        Read more
By DGone
product price
4.5 | 66 customer ratings
88% of the ratings are 4-stars or 5-stars
I have a Craftsman YT4000 Tractor with a 724cc Briggs Stratton V-Twin Platinum Engine. My tractor started to lose power intermittently and troubleshooting pointed to a bad coil. I could not easily find the OEM Ignition Coil so I decided to give the Stens replacement a try. Stens coil is a little bigger than the one it replaced but
        Read more
By Jose O. Cordero
I have a 20 year old Craftsman Mower with a 18.5 HP twin cylinder engine. The engine is notorious for eating coils. There is a transient voltage that spikes when the engine is shut down. I have all of the fixes installed on the engine but it still damages the coils. They become weaker over time to the point that they will not make
        Read more
By Clyde
It works on a Briggs and Stratton 20hp model 406777, but requires some plastic trimming on the engine cover. It's also a little bit more difficult to gap than the stock units were. It does work though and it's cheaper than most sources. Can't speak to longevity other than it's run for approx 4 hrs without issue. Nice to have the mower
        Read more
By Eric
product price
5.0 | 11 customer ratings
100% of the ratings are 4-stars or 5-stars
Exactly as expected. Fast
        Read more
By Jim
Very
        Read more
By Racelady
It is perfect. so easy to use. My Gas blower and weed eater wokrs fine with less smoke smell.
It was packaged good and received it
        Read more
By Edward J.
product price
4.3 | 138 customer ratings
84% of the ratings are 4-stars or 5-stars
you will need these, also a hint you will or might have a problem taking old bolts out they will ring off which is ok because your changing the spindles ,i use a impact set set but here is the problem the heads are hard to fit tightly if the side are to wide so i used a 1/4 inch socket with a adapter to downside the 1/2 to 1/4 inch the
        Read more
By ANTHONY TELLS THE WAY IT IS AFTER USEING GOOD OR BAD
Worked to replace bolts on a cub cadet 1046vt mower deck spindle. I wouldn't call these "true" self tapping bolts, they look like the picture, I consider self tapping to mean they have a drill/cutting tip. They worked to self tap into aluminum though, just have to be careful and line them up straight or you can run a tap through
        Read more
By S. Simmons
rip off. they are just bolts. Nothing special at all. Spindle holes should be tapped anyway. save 10 bucks and go to the hardware store and get some simple little capscrews. Self-tapping my ass. (ok that last part didn't come out quite right but too funny).
        Read more
By L or K Rohrscheib
5.0 | 10 customer ratings
100% of the ratings are 4-stars or 5-stars
Popped the old carb off, popped this one on. First pull and my lawnmower was back
        Read more
By William A Beal
it worked perfectly,no problem arrive on
        Read more
By Jenny Arrington
Everything matched up plug and play perfect no problems. Started right up first
        Read more
By Amazon Customer
4.4 | 40 customer ratings
81% of the ratings are 4-stars or 5-stars
Fit my 2008 EZGO RXV. Easy to install
Disconnect negative battery wire from last battery
Turn key to reverse
Remove tire and rear panel
Unplug brake assembly
Remove three 10mm bolts and remove brake assembly
Clean motor side with SOS pad, stainless steel or wire brush till shiny clean
Line up new brake
        Read more
By Raymond S. Surprenant
Need an upgrade for your RXV brakes....? This is your answer. Well built and easy to replace yourself, even at a novice level of mechanical expertise. Simple plug and play capability. These wear out over time, inherent with the RXV, so go ahead and buy this and start stopping
        Read more
By FlyingArmy
Ideal replacement for my worn out brake system. Torque wrench is an important part of the
        Read more
By Amazon Customer
product price
4.5 | 26 customer ratings
85% of the ratings are 4-stars or 5-stars
Nicely priced replacement for a spindle for the 50" deck on my ten year old Cub Cadet RZT zero turn. The original had a a cracked mount so this was a good all in one option. The only thing you need to know is you will have to, either thread holes in it, or buy some grade 8 bolts, nuts and washers since the mounting holes are not
        Read more
By D Town
Perfect fit for my Cub Cadet Lawn Mower Deck, the screws are self tapping and hence the holes have no threads, I was worried reading the comments at the time of ordering, but self tapping screws just do the
        Read more
By Manish Chand
Worked great. I bought one as a spare in-case one of the other spindles fails. At this price, I would advise everyone to have at least one spindle as a spare so your mowing schedule doesn't get
        Read more
By Kev Jar
4.8 | 11 customer ratings
100% of the ratings are 4-stars or 5-stars
I had to improvise with this. I really needed one with the same size fitting on both sides, but Amazon didn't have one so i made this work on my snow thrower. So far it's working
        Read more
By T. Castellano
The valve was shipped and received as promised, and it was easy to install and works
        Read more
By Bernice Schuberg
Excellent shut off Much better than the plastic one it
        Read more
By Dennis J. Cavallo
4.9 | 8 customer ratings
100% of the ratings are 4-stars or 5-stars
It fit and worked. The old float on my 78 CT70 developed a pin hole somehow and was filling up with gas. Replacing with this one fixed the
        Read more
By Maggie Bush
Perfect replacement for our Portable Honda generator 600. Our old original float had a hairline
        Read more
By G Evans
The float was as described it fit the carburetor. I received it on time. But my carburetor still
        Read more
By Big Al
5.0 | 7 customer ratings
100% of the ratings are 4-stars or 5-stars
Perfect fit for my aging Snapper
        Read more
By The Renisaunce Man
Just as described fits
        Read more
By j
Used to Repair Snapper
        Read more
By TD
5.0 | 7 customer ratings
100% of the ratings are 4-stars or 5-stars
These eyelets are necessary in order to keep the SHINDAIWA string trimmer Head (450) working properly. Thank you for asking for my
        Read more
By CLW
Replaced missing original. String trimmer back in
        Read more
By Cp
It is just what I needed at a lower
        Read more
By ELLIS C. JACKSON
product price
4.2 | 35 customer ratings
73% of the ratings are 4-stars or 5-stars
I bought 2 of these to replace the 8yro originals on my mower.....after a mouse used the rubber from the old wires as decoration for the nest I found under the shroud.. Only mowed once since I installed them, but they made a huge difference in power ....and the mower runs quieter ....even made me
        Read more
By Douglas
I got the wrong one for my mower. My own fault, but online research was sketchy. Definitely don't make the same mistake I made, instead remove old part and get part number off of it. I matched up model number of mower (SV 735), but there is two types for some model. Mine has 3 plugs, this one has only two. I may try the 25 707 03-S module
        Read more
By Drpepp
Was the part called for by my mower's parts book, but not the part actually on the mower. As someone stated before, check first. Not only will you have to pay return shipping, they beat you over the head with a unadvertised 20% restocking fee even though the part was never
        Read more
By K. Miller
4.5 | 12 customer ratings
75% of the ratings are 4-stars or 5-stars
Works as
        Read more
By Jason
Great description. Everything as
        Read more
By Jack
Got my older mower running again like new. I'll be a bit more careful in the future when going through overgrown grass to not tangle up my mower and lose another
        Read more
By Amazon Customer
4.6 | 9 customer ratings
78% of the ratings are 4-stars or 5-stars
fit after market seat. did what it was supposed to. Simplicity
        Read more
By Ron Grosjean
Just what I
        Read more
By Terry Jones
Perfect, exact, OEM part at half the price of the dealer. Does not get any better than
        Read more
By Gregorio