Top Rated in Industrial Brakes & Clutches

Compare the most helpful customer reviews of the best rated products in our Industrial Brakes & Clutches store. These products are shortlisted based on the overall star rating and the number of customer reviews received by each product in the store, and are refreshed regularly.

Top rated products in Industrial Brakes & Clutches

4.7 | 99 customer ratings
94% of the ratings are 4-stars or 5-stars
Worked great and is good quality. Dont even bother to try to repair your old one. Its that
        Read more
By mary
worked as designed, easy to
        Read more
By C.Webb
Simple screw on installation. Works
        Read more
By ANTHONY H.
4.8 | 29 customer ratings
94% of the ratings are 4-stars or 5-stars
Easy to cut to the correct length. Now have a lifetime
        Read more
By Auzzie2
Now I can make my own keys, no matter what length I
        Read more
By MikeBWCA
I couldn't find one of the right length in the big box stores, so I bought this. Way more than I will ever need. I used this to pair a replacement pressure washer pump to a briggs and stratton 6hp intek 190 engine (from a generac pressure washer). It fit perfectly (of course I had to cut it to length
        Read more
By DGone
4.7 | 30 customer ratings
91% of the ratings are 4-stars or 5-stars
as advertised easy in and fixed the
        Read more
By WESLEY BROOKS
Great
        Read more
By Percy Jones
Dont spend a bunch of money on high end air filters at the cart shop...this works great and fits great. I have a 1996 Medalist EZGO and this fits
        Read more
By Jerry D. Bicknell
product price
4.5 | 66 customer ratings
88% of the ratings are 4-stars or 5-stars
I have a Craftsman YT4000 Tractor with a 724cc Briggs Stratton V-Twin Platinum Engine. My tractor started to lose power intermittently and troubleshooting pointed to a bad coil. I could not easily find the OEM Ignition Coil so I decided to give the Stens replacement a try. Stens coil is a little bigger than the one it replaced but
        Read more
By Jose O. Cordero
I have a 20 year old Craftsman Mower with a 18.5 HP twin cylinder engine. The engine is notorious for eating coils. There is a transient voltage that spikes when the engine is shut down. I have all of the fixes installed on the engine but it still damages the coils. They become weaker over time to the point that they will not make
        Read more
By Clyde
It works on a Briggs and Stratton 20hp model 406777, but requires some plastic trimming on the engine cover. It's also a little bit more difficult to gap than the stock units were. It does work though and it's cheaper than most sources. Can't speak to longevity other than it's run for approx 4 hrs without issue. Nice to have the mower
        Read more
By Eric
5.0 | 10 customer ratings
100% of the ratings are 4-stars or 5-stars
Popped the old carb off, popped this one on. First pull and my lawnmower was back
        Read more
By William A Beal
it worked perfectly,no problem arrive on
        Read more
By Jenny Arrington
Everything matched up plug and play perfect no problems. Started right up first
        Read more
By Amazon Customer
product price
4.3 | 139 customer ratings
84% of the ratings are 4-stars or 5-stars
you will need these, also a hint you will or might have a problem taking old bolts out they will ring off which is ok because your changing the spindles ,i use a impact set set but here is the problem the heads are hard to fit tightly if the side are to wide so i used a 1/4 inch socket with a adapter to downside the 1/2 to 1/4 inch the
        Read more
By ANTHONY TELLS THE WAY IT IS AFTER USEING GOOD OR BAD
Worked to replace bolts on a cub cadet 1046vt mower deck spindle. I wouldn't call these "true" self tapping bolts, they look like the picture, I consider self tapping to mean they have a drill/cutting tip. They worked to self tap into aluminum though, just have to be careful and line them up straight or you can run a tap through
        Read more
By S. Simmons
rip off. they are just bolts. Nothing special at all. Spindle holes should be tapped anyway. save 10 bucks and go to the hardware store and get some simple little capscrews. Self-tapping my ass. (ok that last part didn't come out quite right but too funny).
        Read more
By L or K Rohrscheib
product price & FREE Shipping
4.5 | 26 customer ratings
85% of the ratings are 4-stars or 5-stars
Nicely priced replacement for a spindle for the 50" deck on my ten year old Cub Cadet RZT zero turn. The original had a a cracked mount so this was a good all in one option. The only thing you need to know is you will have to, either thread holes in it, or buy some grade 8 bolts, nuts and washers since the mounting holes are not
        Read more
By D Town
Perfect fit for my Cub Cadet Lawn Mower Deck, the screws are self tapping and hence the holes have no threads, I was worried reading the comments at the time of ordering, but self tapping screws just do the
        Read more
By Manish Chand
Worked great. I bought one as a spare in-case one of the other spindles fails. At this price, I would advise everyone to have at least one spindle as a spare so your mowing schedule doesn't get
        Read more
By Kev Jar
4.5 | 25 customer ratings
87% of the ratings are 4-stars or 5-stars
Old mower was dang hard to start, but now I can prime it, and the bad boy fires right up.

Much needed little part that makes a HUGE
        Read more
By Kenneth Kelly
By Sarah
Would have made it easier if I had known ahead of time how to remove the old one but it's called learning. No problem with the primer bulb
        Read more
By Steven Milsteen
4.4 | 40 customer ratings
81% of the ratings are 4-stars or 5-stars
Fit my 2008 EZGO RXV. Easy to install
Disconnect negative battery wire from last battery
Turn key to reverse
Remove tire and rear panel
Unplug brake assembly
Remove three 10mm bolts and remove brake assembly
Clean motor side with SOS pad, stainless steel or wire brush till shiny clean
Line up new brake
        Read more
By Raymond S. Surprenant
Need an upgrade for your RXV brakes....? This is your answer. Well built and easy to replace yourself, even at a novice level of mechanical expertise. Simple plug and play capability. These wear out over time, inherent with the RXV, so go ahead and buy this and start stopping
        Read more
By FlyingArmy
Ideal replacement for my worn out brake system. Torque wrench is an important part of the
        Read more
By Amazon Customer
5.0 | 8 customer ratings
100% of the ratings are 4-stars or 5-stars
Perfect fit for my aging Snapper
        Read more
By The Renisaunce Man
Just as described fits
        Read more
By j
Used to Repair Snapper
        Read more
By TD
5.0 | 6 customer ratings
100% of the ratings are 4-stars or 5-stars
For a generic replacement it was
        Read more
By Bill
Ok
        Read more
By 6606313469
Ok
        Read more
By darrell dupuis
product price
4.2 | 35 customer ratings
73% of the ratings are 4-stars or 5-stars
I bought 2 of these to replace the 8yro originals on my mower.....after a mouse used the rubber from the old wires as decoration for the nest I found under the shroud.. Only mowed once since I installed them, but they made a huge difference in power ....and the mower runs quieter ....even made me
        Read more
By Douglas
I got the wrong one for my mower. My own fault, but online research was sketchy. Definitely don't make the same mistake I made, instead remove old part and get part number off of it. I matched up model number of mower (SV 735), but there is two types for some model. Mine has 3 plugs, this one has only two. I may try the 25 707 03-S module
        Read more
By Drpepp
Was the part called for by my mower's parts book, but not the part actually on the mower. As someone stated before, check first. Not only will you have to pay return shipping, they beat you over the head with a unadvertised 20% restocking fee even though the part was never
        Read more
By K. Miller
4.5 | 8 customer ratings
83% of the ratings are 4-stars or 5-stars
Great product and fast
        Read more
By Amazon Customer
Looks better than the original. It fit on my 2014 BadBoy Outlaw xp 61” deck without issue. I’ve only put about 6 hours on it so far but it seems to be doing
        Read more
By MaggieL
Great product but the height is slightly different than the factory spindle. So replace all three or use a factory
        Read more
By Bob N.
4.7 | 5 customer ratings
100% of the ratings are 4-stars or 5-stars
Perfect replacement. No
        Read more
By mst3k4eva
works
        Read more
By matthew
bolted right up works great good
        Read more
By rrc
product price
4.0 | 17 customer ratings
83% of the ratings are 4-stars or 5-stars
Voltage regulator came in as scheduled. Installed it in my cart very easy. Fix my problem of not charging. Cart now puts out 15
        Read more
By Zachary and Andra
It fixed the
        Read more
By VetMedNut
Checked it after install and it worked. Golf cart was parked for next 2 months while we replaced body & crank case gasket. Bought in July and now it is October and it has gone bad and needs to be replaced
        Read more
By Melissa
product price
4.0 | 11 customer ratings
55% of the ratings are 4-stars or 5-stars
perfect fit, work great and priced
        Read more
By Kenneth R.
This item fit my 2015 Bad Boy 54 inch deck as OEM. But the Spindle assembly doesn’t appear to be as heavy duty as original and the bearings in the assembly appeared to only be sealed from the outer race. But I had ordered two too many bearings for my deck rebuild so I replaced with these
        Read more
By Christine W.
Not a direct replacement for my 2013 BadBoy MZ 48. Had to grind it, beat it, and cuss it to make work. If my yard hadn’t needed cutting so bad I would have returned it. However, this is a very well made
        Read more
By Jrob5153
4.1 | 7 customer ratings
68% of the ratings are 4-stars or 5-stars
this stopped the drip of fuel from the carb
        Read more
By Amazon Customer
works and is very universal between most common
        Read more
By Handy Man
By Kevin McIsaac
product price
4.0 | 9 customer ratings
77% of the ratings are 4-stars or 5-stars
Used on Hustler
        Read more
By Amazon Customer
By Clint Hudson
These bearings are great. Installed on a 48 Hustler commercial
        Read more
By Don Waters
3.9 | 8 customer ratings
65% of the ratings are 4-stars or 5-stars
Durable and great for replacing worn or broken
        Read more
By copeland mills
Great item perfect fit.Great value.Put them well only 2 on a couple older chainsaws and they fit
        Read more
By David l
Thought they were a little over
        Read more
By rainbow6
product price
3.7 | 6 customer ratings
58% of the ratings are 4-stars or 5-stars
Perfect fit. I've purchased replacement spindles off Amazon before that didn't fit right or were too tall for my application but this fit my cub cadet 54 RZTS
        Read more
By Amazon Customer
The part just arrived but the ad says that the puller assembly has a grease zerk. It does not. I've included a picture of a grease zerk and definition. Please update your ad.
"A grease fitting, grease nipple, Zerk fitting, or Alemite fitting is a metal fitting used in mechanical systems to feed lubricants, usually lubricating
        Read more
By Angelanash4
I ordered 3 of these to get a jump on maintenance next spring 2018.
Description says there's a grease zerk and there isn't. Description says nut included and it isn't.
The quality seems good, but I ordered this over other spindles based solely on those two things being included.
There also wasn't a spacer included as
        Read more
By JWK