Top Rated in Mechanical Shafting

Compare the most helpful customer reviews of the best rated products in our Mechanical Shafting store. These products are shortlisted based on the overall star rating and the number of customer reviews received by each product in the store, and are refreshed regularly.

Explore top rated products in Mechanical Shafting by category

Top rated products in Mechanical Shafting

4.7 | 244 customer ratings
93% of the ratings are 4-stars or 5-stars
used for dolly install great seems legit theyre solid steel so definitely durable. If they start to slip i might try adding some lock tite or even grindingdown the shaft a little to make it impossible to slip. doubt it will tho for my
        Read more
By PonySlaystation
Well it fits snug as a bug on the old axle, still got to wait for the new one to get here, but very good quality, heavy duty, I'd say it's a good
        Read more
By Richard Jr.
Within two weeks of buying a new hand truck the push-washer fell off the axle and was lost. For several months I had to steer carefully to insure the left wheel wouldn't come off the axle. Finally I bought this set of shaft collars and all is solved. They installed easily and will be much more reliable, I hope, than the prior
        Read more
By Craig Johnson
4.9 | 38 customer ratings
94% of the ratings are 4-stars or 5-stars
It did just what I wanted it to. The seat on my wife's computer chair kept slipping down below the height she set it at.
I measured the diameter of the shaft under the seat and ordered this part to clamp around the shaft. It keeps the seat at the level she
        Read more
By Happy buyer
I made a coupling for a tag-a-long bicycle trailer that clamps to the seat post of the bike towing the trailer so my granddaughter can accompany me or her father on bike rides. The seat post is 1" diameter and these work
        Read more
By T
Works very well under stressful applications. I use this lock on live axel applications to secure the axel from horizontal shifting. Not once has the lock been
        Read more
By Magbert
4.6 | 160 customer ratings
89% of the ratings are 4-stars or 5-stars
the holding power of these collars is great have had no slipping on the go kart
        Read more
By ellen
I purchased them to use on the handles of my dumbbells. Well designed. Sits tight. Good value for
        Read more
By Sanjar
I use these for stops on my wood lathe tool rests. They hold very well and are easily loosened to reset the height of the rest. I will be buying
        Read more
By Dano
4.6 | 76 customer ratings
89% of the ratings are 4-stars or 5-stars
I used them to hold the shaft in place to a 4300lb solid concrete roller 36” d 48” wide.
They have done exactly what I
        Read more
By Dennis Schaaf
Not too much to say, they're stop collars. However, the bore is dead on 3/8 inch and the finish is good. I bought these as replacement for Kreg bit stop collars and they work great for
        Read more
By S. Holloway
The item was as described in the advert. I found the tolerance on the set screw to be a little loose. I replaced the screw with a screw with a nylon tip. Works
        Read more
By Don Miller
4.8 | 25 customer ratings
92% of the ratings are 4-stars or 5-stars
I’m a jeweler who up until I got this foredom has been using a dremel with a flex shaft. Which I thought was good enough, but wow was I wrong.

The foredom blows any dremel out of the water. The speed and control are amazing and the hand piece not heating up is so great!

Because this is the quick change hand piece
        Read more
By J.G.
I love this tool! I use it for creating jewelry and the difference between this and the Dremel with a flexshaft is like night and day. The foot pedal alone makes it worth it. The only "complaint" I would have is that the quick change is rather limited. That seems like it could have been engineered to fit more sizes. No worries
        Read more
By Jennai Patterson
Great kit. Don't be fooled by the box it comes in. The box states another kit # but does include the quick change
        Read more
By DrJon
4.5 | 67 customer ratings
88% of the ratings are 4-stars or 5-stars
Bought these to keep the wheels in place on my go cart they have done the job so
        Read more
By jay dawson
These work great. Make sure you have a 9/64" hex wrench for the screws, most sets don't have this
        Read more
By Herbert H Worff
These collars fit perfectly on my 1/2 inch shaft bench grinder and so far are holding just fine. Seem to be decent quality as well. However, as another reviewer pointed out you need a 9/64th bit to tighten the allen screw and most allen wrench sets do not include that size. Luckily, I was able to find another style bit that worked. That
        Read more
By bushwacker
4.5 | 66 customer ratings
85% of the ratings are 4-stars or 5-stars
Great alternative to those silly end caps holding on wheels. Actually cheaper than many of the less attractive - use once and toss slide on caps. Love these collars, attractive and
        Read more
By James
Good finish on them and they spaced my axle fine. Did not need the set screws, just slipped them on. Missed the fine print that the company is in the US, but not the manufacturer. China
        Read more
By Bill S.
I ended up ordering two more sets as they did the job of securing new hand truck wheels. They seem solid and durable. The Alan key set screw seemed to be an odd size. None of my keys quite fitted. Or, rather, they fitted some but not all. (?) Otherwise these did the job well and were delivered on
        Read more
By D. J. Leedham
4.4 | 94 customer ratings
86% of the ratings are 4-stars or 5-stars
Awesome quality, perfect for locking in
        Read more
By Jerry Jenson Jr.
These worked great on my go kart. Locked the axle right in place so I can drift again.
        Read more
By Paul
Solid quality SS shaft collars at a fraction of the price found at local hardware stores. I mean, ACE charged the same price for ONE collar as these guys charge for a set of
        Read more
By FILO
4.3 | 173 customer ratings
81% of the ratings are 4-stars or 5-stars
I saw these installed on the saddle bag guards on the instructor's motorcycle while taking Ride Like A Pro-Maryland, as he demonstrated how to properly pickup a 900+ pound motorcycle. During the class, he purposely dropped the bike for a class demonstration. As the bike was tossed to the ground, I noticed that the instructor had
        Read more
By Deblynz
The split collar fit perfectly on a 1 inch shaft and did the job I needed to hold a roller in
        Read more
By Triton53
I had no trouble with the shaft collars. They hold securely to the
        Read more
By Dennis D.
4.8 | 14 customer ratings
89% of the ratings are 4-stars or 5-stars
I liked the fact that these collars arrived much earlier than predicted. I welded these collars to 1" steel pipes to create strong 24 inch rollers for a large winch fairlead that was using 3/4 inch shafts. They welded up just fine and accomplished my
        Read more
By Rollin C. Justen
Well made and sturdy. Holds on rod well. Can't beat the
        Read more
By sjg56k
These worked fine for the project. No problems what so
        Read more
By Marc Quick
4.5 | 26 customer ratings
91% of the ratings are 4-stars or 5-stars
Used for our Redbull soapbox car, worked great. Great quality and
        Read more
By 2robotguy
Great. Does what it is suosed to do. Very high quality
        Read more
By Ed Walker
I needed 2 of these to lock down my race car steering wheel on a 3/4" shaft. Worked
        Read more
By Corvair Guru
4.6 | 19 customer ratings
85% of the ratings are 4-stars or 5-stars
Simply gorgeous set screw collars. One side chamfered heavily and one side lightly chamfered in case these collars are set against a bearing. Fit perfectly on my +0.0000 - 0.0015 stainless shafting with very little slop. I do wish they would provide the i.d.
        Read more
By The Honest Critique
great
        Read more
By Amazon Customer
Product delivered quickly. The collars are exactly as described and worked well in my
        Read more
By stl82
4.3 | 57 customer ratings
80% of the ratings are 4-stars or 5-stars
Purchased these for the front wheels of my john deere. The wheels kept popping the e clips off. No longer an issue havnt lost a wheel since i put these
        Read more
By Christian
One of the other comments said that they had difficulty getting these over a 3/4" shaft. I had similar issues. I literally had to drive one over a shaft that was exactly 3/4" in diameter and then drive it into position. It works but could be SO much better if the opening was just a little
        Read more
By S. Pritchard
I do not recommend this 3/4" single split. It is too narrow and the contractor who came over said he could not fit it over the rod without hammering it in place. Doing that would not only require repainting but given the extremely tight fit would be impossible to adjust in any subtle fashion. Apple wrote the seller on my behalf
        Read more
By DW
4.7 | 10 customer ratings
100% of the ratings are 4-stars or 5-stars
excellent
        Read more
By bigtut
Good quality. Nice strong
        Read more
By BruisedKnuckleHead
could have done with out the rust on them but they are as
        Read more
By Twin Hull Captain
product price
4.9 | 6 customer ratings
100% of the ratings are 4-stars or 5-stars
Worked out great for my project. Was .003 inch undersize which was exactly correct, fit in the pillow blocks just
        Read more
By Charles Wade
Great service, extremely nice product, and I am very happy. Thank
        Read more
By Paul F Jacobs
Doing its
        Read more
By gary
5.0 | 5 customer ratings
100% of the ratings are 4-stars or 5-stars
Used these end caps for the elfa closet system where the rods extends past the supports. This way the hangers cannot slide off [the plugs will not serve that purpose]: would recommend to the manufacturer to supply an allen wrench let's say for ordering 6 or
        Read more
By An Amazon Customer
Good
        Read more
By Amazon Customer
great
        Read more
By Scott P.
4.7 | 7 customer ratings
100% of the ratings are 4-stars or 5-stars
Having 2 set screws makes this a MUST HAVE for stabilizing depth guage
        Read more
By Pierre
I hate that we rely on China for this kind of thing. For the price, this should be made in USA. That said, it works as it
        Read more
By turbo54
Works. High
        Read more
By Eric N. Gustafson
product price
4.5 | 9 customer ratings
87% of the ratings are 4-stars or 5-stars
Installed easy on my baba30
        Read more
By Reticenti
By Amazon Customer
Not a Martyr anode. I purchased two of the 2 inch & they are a different design than the anode pictured in the
        Read more
By Brent Hartwig
4.2 | 17 customer ratings
87% of the ratings are 4-stars or 5-stars
I used these split shaft collars as additional support for bronze bushings that I had installed on the ends of 1/4" thick by 1 1/2" wide flat bar stock. After installing them over the bushings I tack welded them to the bar. Worked great for extra strength to support the
        Read more
By Chuck C.
Worked perfect as a wheel retainer on my chicken coop axle. I used a 3/4 steel shaft with front rims\tires off a riding mower. I used these shaft collars to hold the wheels in place. These were much cheaper than the ones available at the local ag
        Read more
By JamesinPA
Exactly what I was looking for. Precise bore diameter that clamps well on a .750" diameter shaft but can be loosened easily. I only needed two for my project but the price for 4 was very reasonable and now I have two
        Read more
By Zeebo
product price
4.8 | 5 customer ratings
100% of the ratings are 4-stars or 5-stars
Seems to be good
        Read more
By Kevin in NC
Part was exactly as described. High
        Read more
By Michael L.
The shaft was just what I needed and it was packaged correctly for the items size, weight and
        Read more
By Jerry Pitts