Top Rated in Protective Caps

Compare the most helpful customer reviews of the best rated products in our Protective Caps store. These products are shortlisted based on the overall star rating and the number of customer reviews received by each product in the store, and are refreshed regularly.

Top rated products in Protective Caps

4.6 | 146 customer ratings
89% of the ratings are 4-stars or 5-stars
I added peg boards to my shed along with all the accessories. I had plenty of peg hooks without the black tips. I found these and quickly jumped at it. I love and enjoy that they really add to the clean professional look of the peg board. It just takes it up a notch. Also, I have some pricy tools and I didn't want them all scratch
        Read more
By cortezed
I have a peg board with 1/8" (3mm) diameter metal pegs. I wasn't sure it I should get 3mm or 3.5mm. I decided on the 3mm because if 3.5mm were too loose, that would cause additional problems. The 3mm was snug but I found if I squeezed them between my thumb and forefinger and rolled them around for a few seconds, that stretched them out
        Read more
By TC
I bought these to use on an amp rack for my VOX AC30C2. The 4.5mm ones fit the prongs that stick upward perfectly. Now I don't have to worry about damaging my amp when I have to move it.

I will have to update later about the durability of this item as they have only just been installed. Although I don't see any issues as I have
        Read more
By Digital Steve
4.9 | 33 customer ratings
100% of the ratings are 4-stars or 5-stars
These feel a good thickness to me, not too thin and not too thick. Very easily trimmed with scissors to fit my needs. I bought these to slip over plastic pegs on our Container Store hamper frame, since the hamper has plastic grommets in the corners that slip over plastic pegs, they just kept slipping off with the slightest bump. After
        Read more
By Mechow
These plastic caps are just what I needed to replace the tips on the end of the tent poles on my older pop up dome text. They helped the poles slide through the sleeves of the tent. They're soft enough so that when I dropped them into a cup of hot water, they easily stretched to fit over the end of the pole and as they cooled, they
        Read more
By Kargold
I use these to prevent bugs, dirt, etc. from getting inside my barbed fittings when not in use. Works like a
        Read more
By Rick M.
4.5 | 247 customer ratings
86% of the ratings are 4-stars or 5-stars
I was looking for a basic cap to cover some pipes that support stairs going to my boat dock. These were just what I needed. They seem to be holding up great
        Read more
By Jeff
Just what I needed to cover the jungle gym pipe things. The old plastic caps had all cracked from the sun. These fit the 2” poles perfectly. I wouldn’t have minded if they were a tad bit smaller so I could stretch them a tiny bit, but they are snug as it is. Great price for the
        Read more
By linda
It turned out I ordered the wrong size - not because of the vendor but due to the various ways the O/D (outside dimension) of aluminum is described. My "2"" pipe was in fact smaller, so I had to send these back and reorder the next size down. The company handled that extremely efficiently and I would certainly recommend them. The new ones
        Read more
By Robin
4.5 | 104 customer ratings
85% of the ratings are 4-stars or 5-stars
The soft rubber tips work great on the rebar stakes I bought to use as a rope barrier. Prevents accidentally scratching your legs on the rough rebar
        Read more
By William T. Walton
I use these over the top ends of rebar for safety. I have rebar holding the sides of my elevated metal siding vegetable boxes to keep the soil from bulging the sides. I don't like the idea of bare metal tops in case someone falls and lands on a rebar. I am also a kiteflier and we use these on the top end of rebar that we pound into the
        Read more
By Daniel C. Ecker
These do not fit a 1/2" bolt end. We measured the bolt before ordering. They slide right on, and as such come right off. We put them on bolts that hold bed racks in our truck, and after driving for 1.5 hrs they were all gone. If you don't need them to fit snugly maybe they'll work for
        Read more
By Lara from NH
4.5 | 86 customer ratings
87% of the ratings are 4-stars or 5-stars
I hesitated buying these because they seemed a little expensive and they are, really. They really are exploiting a good idea. I mean it's basically just a piece of plastic, albeit a well designed one. But they do an excellent job of sealing a caulk tip and do it now, instead of getting off the ladder, finding some packaging tape, and
        Read more
By howard
These are without a doubt the VERY BEST caulking tip covers I've found. The keep open tubes of caulking fresh for MONTHS.
I bought a pair of these at one of the big box stores a few years ago, but was never able to find them again. Very pleased to find them on Amazon.
For some reason, it's cheaper to order two packs of two
        Read more
By Think For Yourself
Just make your own out of wax or aluminum foil or whatever. These get clogged after only a few uses and kind of feel like a waste of you are planning to get several uses out of them. I wouldn't buy them
        Read more
By Mishka Haznor
4.8 | 28 customer ratings
95% of the ratings are 4-stars or 5-stars
After an exhaustive search, I found them. The finest 3/8" round black vinyl end caps that I've ever purchased. They are round. They measure 3/8" (inside diameter). They are black. They are vinyl. 10/10 would purchase
        Read more
By Brian Compton
Used these to cover up some 3/8 nylon locking nuts. Worked
        Read more
By J. Ferachi
Goes perfectly over the ends of 1/4" NPT male air tool fittings to keep bugs or debris from getting in your
        Read more
By Eric N. Sorensen
4.7 | 26 customer ratings
95% of the ratings are 4-stars or 5-stars
Bought these for a reamer handle. The ends are on the sharp edge side & constantly fell out. These solved my problem. Seems high quality rubber, shug fit on handle. Will come off when pulled, does not fall off easily. Just how I wanted. Put a nice looking finishing touch on an inexpensive tool. I measured diameter of shaft with a
        Read more
By John Sulsenti
I purchased these to place over some protruding machine screws. Worked
        Read more
By Amazon Customer
Great kit of several types of caps. Great for capping off old vacuum
        Read more
By Slag
4.5 | 44 customer ratings
85% of the ratings are 4-stars or 5-stars
A perfect cover ro my 1/2" diameter rebar in my garden. Since its 1" deep they are a very snug fit which is perfect. Hard to get off without a pliers. Protects sharp edges from jumpy puppies, kids and
        Read more
By Andre Rosteing
These did exactly as advertised and they don't fall off even at 75
        Read more
By David M. Bowman
Great item for the shop at a very reasonable
        Read more
By Amazon Customer
4.6 | 30 customer ratings
94% of the ratings are 4-stars or 5-stars
I have a Bush Hog in my barn that has 2 bolts protruding from the rear, and had given me a good gash when I was moving around it. These covers see to it that it doesn't happen
        Read more
By Kurt
The end caps are correct as to size. In addition they are of a thickness to be strong and at the same time to have some flexibility. Because of the flexibility they were easy to install and have a very secure fit. Glad I made this
        Read more
By Lone Star
I thought these were overpriced. Bought them because they were long and the right size. They fit perfectly and are a good thickness to be sturdy and long-lasting. They are serving the purpose they were bought for but are priced double what they should
        Read more
By Al Errico
4.4 | 59 customer ratings
87% of the ratings are 4-stars or 5-stars
I really only needed one but couldn't find them anywhere. Since then, I have used several on exposed screws. They work
        Read more
By KSUCAT66
Always need caps for a variety of my projects. These do the
        Read more
By Bruce Capoferri
Received item as
        Read more
By John C
4.5 | 35 customer ratings
85% of the ratings are 4-stars or 5-stars
I used these to cap the end of a armrest mount that I removed from my car. It does a good job and I was glad they had the size I needed. The cap went on nice and snug. It works for my application. I'm going to try to use these next to cap a bleeder valve and see if it will prevent leakage while working. Nice and a great
        Read more
By klulu
Not cheaply made, do not know what else to
        Read more
By splaino
Works as it
        Read more
By Donald
4.4 | 36 customer ratings
82% of the ratings are 4-stars or 5-stars
We needed these for bolts that stuck out of a upper bunk bed frame assembly, even though I cut the bolds off shorter, this was a great finish compliment to the visible part of the bolts, it covered them up made it look better and certainly made it safer so no one would run in to the bare
        Read more
By Steve Riggs
Perfect for what I
        Read more
By Jerzee
Perfect fit for the end of a fiberglass whip for the
        Read more
By desertwolf
4.7 | 16 customer ratings
90% of the ratings are 4-stars or 5-stars
Fit the bill for my woodworking
        Read more
By Michael O. Davis
Just what we
        Read more
By James D. Holt Jr.
Well made, easily stretched over 1-1/2 pipe, but falls right off a 1-3/8 pipe. Maybe mine were sized incorrectly. If I was buying again I would buy smaller
        Read more
By Nick Holes
4.7 | 16 customer ratings
91% of the ratings are 4-stars or 5-stars
Thank
        Read more
By Jesus Hernandez Jr
These were exactly as described and worked great for my
        Read more
By MLM
By Kindle Customer
5.0 | 10 customer ratings
100% of the ratings are 4-stars or 5-stars
Used this dust cap to protect the under hood outlet on an ARB air compressor. Fits perfectly, solid heavy duty
        Read more
By frank e stone
This is perfect for capping off air line on portable on board air. It keeps dirt and water out of it. Plus, you dont loose it because it has a loop to keep it in place when it is popped off the
        Read more
By Wake Surfer
Used to cover the inlet for my ARB compressor chuck from dirt and
        Read more
By penmoe23
4.7 | 14 customer ratings
90% of the ratings are 4-stars or 5-stars
High quality plastic, thick. I'll use these to finish handle
        Read more
By John Sulsenti
I had an outdoor umbrella that needed a cap over the top pole. The original cap was threaded but since it was over 15 years old, I couldn't find a replacement. I used one of these caps as a plug and then used tape to complete the repair and it seems to be working
        Read more
By Satisfied
By William Hall
4.6 | 16 customer ratings
95% of the ratings are 4-stars or 5-stars
Work great, use them on half gallon beer
        Read more
By craig stevens
These work best on the Kevita bottles (the brown bottles with the heart on the bottom). The threads just match up better between the bottle and the cap than they do on the clear GT bottles. The threads are definitely different on the GT bottles. I had one of the lids crack apart as I screwed it down on a GT bottle. Note that you will
        Read more
By Makroner
Purchased and when it delivered there was only one cap in the envelope. Frustrated with Home Brew Ohio because the item says HOZQ8-473 Polyseal Screw Caps...I expected to receive 6 or 12
        Read more
By C Farren
4.7 | 13 customer ratings
86% of the ratings are 4-stars or 5-stars
I bought these to cover the female quick connect fittings on air compressor to keep dust out. They work perfect for that (specifically the industrial 1/4 NPT quick connects. Outside diameter of fitting is about
        Read more
By T. Eddy
Fine for finishing off an end so it doesn't
        Read more
By Amazon Customer
IT's a plasticy, rubbbery pipe cap. It caps pipe. It is a good
        Read more
By A. Moubray
product price & FREE Shipping
4.4 | 24 customer ratings
80% of the ratings are 4-stars or 5-stars
Does what it’s supposed to. Fit perfect. These are the same caps we use on a jet fuel fuel farm, just cheaper than from the other suppliers. Can be pinned
        Read more
By archemedes
Great product and fast
        Read more
By DR
imagine... USA made... USA sold....fits perfectly.... a hard to find item for my needs.....but they did it.. and did it
        Read more
By Anarchy Biker
4.4 | 22 customer ratings
80% of the ratings are 4-stars or 5-stars
I needed these to fit on the feet of a vanity stool in a bath. They fit exactly & I painted them to match the stool. Solved the problem of metal feet on a tile
        Read more
By L. Hooks
I needed a cap to cover some unused connections on a piece of lab equipment. This vinyl rubber cap fits perfectly onto a BNC connector and blends right
        Read more
By Ronald J. Chownyk
I’m so confuse why are they so little I was expecting them to be three eights of an inch these aren’t even close to an
        Read more
By Jessica Stocker