Top positive review
Easy install, close to factory, could use more power.
Reviewed in the United States on March 11, 2016
Over all, I'm happy with it. It is missing one bracket the factory regulator had but that doesn't seem to be an issue that I can tell. I ordered the Dorman screw and rivet kit and chose to use the screws. One thing to keep in mind is that it is easier to get, what will be, the top right screw in with arm in the full down position. Then you will want to put a piece of tape on it to hold it in place, use that as your first guide screw. Then run the arm in the full up position and slide into door, put glide on windo track and get first screw through.Once all screws and nuts are in place, tighten them all up using a stubby philips on the back. Because I had to drill out the rivets from factory, total time spent was less than an hour. This motor isn't as strong as the factory motor was, and you can hear it, but it works well and seems to be solid. I'm thinking that I may just buy the Dorman rivet gun is my drivers door fails. It would be easier than fishing screws through. Good buy though. Worth the money.