Top positive review
Reviewed in the United States on March 22, 2019
Fit like OEM.
Time will tell how long it will last. However, the large plastic trays that hold the window up have stress cracks from installation (you have to forcibly slide these over the end of the glass until a plastic nub clicks into a hole in the glass...this causes it to bend out until it latches). The originals broke during removal, they were very brittle (it was also below freezing here, which probably didn't help).
Pro tip: You can replace this without completely removing the inner door card and unhooking the door lock/latch. The tracks actually bolt to the plastic inner door card, not the door frame itself. Once you get the glass unhooked from it, you can remove the 4 bolts that hold it to the inner card, and remove the motor (you have to re-use your old motor...it just slides onto the splines). Just be careful not to crack the inner door card where it mates to the latch assembly, there are some brittle (when it's cold) plastic fingers that lock the two together.
Came pre-greased and ready to install.