Top positive review
Easy assembly, quite solid, and LARGE
Reviewed in the United States on August 14, 2018
Relatively easy 1-person assembly. I substituted the 12-inch 1000-lb metal turntable that others recommended (ASIN B0045DV04I), and I like the solid feel and piece of mind - worth the nominal price and a bit of extra assembly in my mind. For extra security, rather than relying on gravity alone, I fastened the turntable to both pieces. Here’s how: Center the turntable on the top (finished side) of the base board, and mark on the base board where the two LARGE holes in the turntable are. Set the turntable aside and drill 3/4” or so holes all the way through the base piece at those two locations. (These holes will be a “window” through which you’ll later attach the turntable to the bottom shelf board.) Now, with a few wood screws attach the turntable to the top of the base board, keeping the large turntable holes centered over the holes you drilled in the base board. Now, take the shelf bottom piece and place it upside down (finished side down) on a work area. On top of that place the base piece, upside down with the turntable attached, on top of the bottom piece (with the turntable sandwiched between). Square up the bottom and base pieces. Now watch through the “window holes” you drilled and gently rotate the base piece slowly until you see the turntable screw-holes with which you’ll attach the turntable to the bottom shelf board. At this point you can drill a pilot hole and screw the turntable to the base piece. Repeat this for three more screws.